What Have You Done To Your 2nd Gen Tacoma Today?

Yes sir! Just met @Bigdaddy4760 this past year but already figured out he’s one of those rare people you find in life that is a genuinely good friend looking to see how he can give not take! Blessed to have met him!

 

Yea mine look like shit and are half yellowing, my plan was to buy some new headlights and just apply some of that headlight clear

$13 Meguiar's Keep Clear Headlight Coating, Maintain Like-New Clarity of Your Headlights with an Easy-to-Use Formula and UV Protection that Lasts All Year Long, 4 Ounce Aerosol

https://www.amazon.com/Meguiars-G17...3P7RZ5FZFNV&psc=1&refRID=YQQB8997M3P7RZ5FZFNV

 

I'll have to check that stuff out then.

 

I wax them when I wash and wax the truck. they still look like new

 

Not. Cool. Was it local?

 

I recently waxed my headlights and then found this in the owners manual so I'm kinda freaked out (not enough to try to remove the wax though):
"Do not apply wax on the surfaces of the lights. Wax may cause damage to the lenses."

 

My truck had a clear bra installed when new and they did the headlights also. No problems...

 

I was going to have mine wrapped in PPF. Maybe that will help

 

Was about 30 minutes away from me

 

Lol I do it all the time never had an issue maybe just lucky

 

Currently installing a amp. Running all the wires plus the seat spacer mod

 

I relocated my trailer hitch outlet.

 

Installed my Level 8 Mk6 wheels. They poke out just enough
I put normal valve stems in until I buy new sensors.

Hint: if you have steel wheels, you have to buy new tire pressure sensors that fit aluminum wheels

 

Almost done tucking all the wires

 

Put on the on the Bestop (new to me) and wired brake light for it this afternoon.

 

Just the amp? I have a base stereo in my 2010. looking to boost my volume. Let us know how it turns out.

 

Here’s more. I recommend putting on a rubber because your about to wet your pants .

 

Also installed a apple car play double din pioneer

 

Projectors for a change

 

What hole saw size used for this? It's been on my list of things to do for too long lol