Colorado Trading Post

Anyone want to sell me an elocker third?

thinking $450 or so

 

Got some goodies available that are a little more interesting than my usual crap.

$100 - DAMAGED 2007 FJ cruiser tcase 175k miles for Auto trans (23 spline)

My dumbass cracked the rear half of the case at the bottom putting it back together because I didnt properly line up the hi/lo shift sleeve. It could probably be welded or JB welded. The case has not been sealed back together so that you can work on it and twin stick if desired. The rear output flange cover should probably be taken off and re-sealed. I replaced the input shaft seal, front output shaft seal, oil pump seal, and shift rail seals. I did not replace the rear out shaft seal or either of the out shaft flange seals but they are included along with a new output shaft nut and shifter base seal. The shifter was hacked off at the junk yard. I dont think I did any other damage except the crack pictured and potentially disturbing the rear output flange cover seal as previously mentioned and pictured.





2009 Tacoma Transfer case 104k miles for manual trans with actuator (22 spline) - $225

2009 Tacoma front ADD tube with actuator 104k - $125

2009 Tacoma 4wd ecu - $100

All 3 of the above from my 2009 taco as a package for $400 (save $50)

These were all pulled from my truck at 104K in perfect working order, actuators and all. I split the tcase to pull the input shaft so I could have a crawl box adapter made. Its assembled but the case is not sealed so you'll have to take it apart to seal it. Theres no speed sensor but the rear output has the required worm gear for the manual trans...it curently has the FJ filler plug. The shift rail sensors are also from an FJ so you'll have to solder your own connectors and torque those. The input flange cover also needs to be removed and sealed and properly torqued. Everything inside is properly torqued.

The ADD tube has the support arm bolts and the star bolts for the diff.




I think that covers it. Let me know if you have questions or need more pics. If an MT guy wants the FJ case and an AT guy wants the taco case, we can swap the inputs and make that work. I would prefer not to separate actuators from the ADD and Tcase but would consider it if folks want specific parts.

Edit: I would also include the in cab 4wd switch which is still installed in my truck for someone who wants the taco parts.

 

Any Interest?

 

Any 5th gen 4runner owners here....
Weathertechs front and rears. SOLD
Also have a set of nfab bars for 5th gen 4runner. That are in new condition. $250. Will post pics later today

~SOLD~
Pending funds

 

Still available. $80 for TW members

 

I’ll take them- the weathertechs. Pm incoming

 

2 kayaks for sale

• kayaks w/ paddles, seat backs and used life vests (X2)
• kayak cart (for single person carry, will fit either kayak)
• foldable J-mounts for roof rack

both kayaks are about 11'. they both have great dry storage inside(all included gear fit inside). one of them is for sure a Cobra, the other is branded a 'UP Sports'. both are made for diving from and are nearly identical design.

Asking $700 obo

 

Some items FS located in Colorado Springs

ARB Air Locker Manifolds 180103 $60 each $110 total for both // never opened - I ordered the manifolds separately and didn’t realize they came with the lockers air tube I bought.





ARB Air Locker Switches $20 for both - SALE PENDING

*never used took out of bags for photo


BNOB - Come up winch fairlead $20 bolts only included, no washers or nuts


NIB - Replacement 1/2" Sling Hook for ComeUp Seal Gen2 Off-Road Winches - 9,500 to 12,500 lbs $20

 

QUESTION:

How much of a market is there for 'used in good condition' front bumper skins and the crash support?

I'll be pulling mine ('10/DCSB/Sport/White) for a front bumper installation, and I'm kinda wondering if I should be careful about it, or not.

 

1. Retrax one mx tonneau cover -600 need gone in less than 2 weeks for camper, works with kbvoodoo racks
2. Switches and aftermarket holder - 30, not parting, take all
3. Rago relay holder, rago light bar brackets - 5 &10 ( )
4. Stock fog lights with vinyl covers and diode Dynamic xml2 led fog lights (really bright) - 75
5. Rigid lights -150 for all 4

Take this stuff away

 

I've got a driver that's good. 97k miles on it.

 

$20 mud flaps

 

I have a turd gen steelie you can have if you want to keep a spacer for your spare as well

 

05 front diff with add - $500
~130k

 

70 gal Diesel aux tank with new 15gpm pump and filter

$600

 

Off Grid Engineering dual battery kit, split version for TRD ORs. Not pictured is the OGE main battery tie down but it is included, I couldn’t find the OEM one so it was still on my truck when I took this picture. This one is setup without the in-cab switch to simplify wiring and honestly, the switch is a useless feature anyway.

Kit comes with a good Duralast Platinum AGM group 34 if you pick it up.

Located in Colorado Springs. $650 with battery, $625 without




TJM 2m awning, basically the same thing as an ARB $150
ARB 2000 full awning room, works with any of the 2m awnings $150
TRED 1100s, used once with one of my ATVs but in good shape $80

 

04 f250 6.0 diesel
Bullet proofed
Head studs
New oil cooler
Coolant filter system
Lifted
Tuned (700ftlbs, 430hp)
New diff fluids
Light bar
New coolant bottle
Aftermarket injectors
198,000 miles

Has a coolant leak and needs a double cardan for the front drive shaft.

$12500

 

Renting my house in South aurora November first, $2300/month

3 bds • 2 ba

https://www.zillow.com/homedetails/4762-S-Yampa-St-Aurora-CO-80015/13108769_zpid/

 

Just gonna cross post as some of this stuff is big and shipping is killing sales. We'll try the more local approach:

All parts are off of my 2014 Tacoma with around 45,000 miles on it unless otherwise listed. Willing to ship at buyer's expense or available in Durango, CO for local pickup. PayPal F/F accepted; otherwise please add 3% for regular PayPal. First paid gets it. No dibs without an immediate PM and payment. Thanks fer lookin'!

2014 Radiator, fan shroud, overflow resi, cap and mounts (one not pictured on left but included in sale). Came off my 2014 with 46,164 miles on it. No damage other than bugs and a couple bent fins (pictured). How's $80+shipping for everything. Carefully boxed and ready to go.




Lexus woodgrain shifter for A/T (and maybe manual...not sure). A slight scuff in the rubber to the left of the light reflection as pictured but hardly noticeable. How's $20+shippin? Will get pics of it installed.



OEM 16" wheel with spare Dunlop 245 pizza cutter (local only, but like the idea of TW Express). 0 miles, wear from hanging as pictured. $99 and it's yours.


Front strut, complete and will include top plate nuts (not pictured). 38,051 grocery getter miles. $25 picked up or free to anyone who buys the spare tire. Also have 2014 rear leaf springs (not pictured), but can send pics or list. 38k grocery getter miles, no rust. $100.



OEM Toyota tranny cooler. Good used condition with a couple bent fins here and there. 47K on it. Asking $20+shipping.



Double Cab Floor mats. Toyota grey carpet (in fair used shape. Freshly washed, minimal stains, moderate wear on fronts with some fraying at the border here and there) and Toyota "all-weather" (fair used shape with wear in the front mats, nearly perfect rears). $20+shipping for the carpet, $25+shipping for the rubber.






2012-2015 OEM Toyota headlights. Truck is parked outside so there is the beginning of some yellowing as pictured. They buffed out pretty nice with a Mother's Ball and their polish. All tabs are intact and unbroken but driver side lower bracket got a little beat up while I tried to figure out how to get it out past my Demello bumper. Includes all bulbs except the 3157 DRL bulbs. Asking $89+shipping for the pair.








2012-15 Silver Sky Metallic (1D6) front bumper cover. Includes fog brackets but no fog lights. Passenger side bumperette was damaged by a hit and run and pulled and broke two of the tabs but is fixable and isn't a big deal if you're not picky (I am). Will include the aluminum inner bumper if you need it. $100 picked up.

 

Still for sale, price dropped...Surely someone wants to build some stuff!!

JD Squared Model 3 tube/pipe bender with rolling cart/stand and 99% of the parts to convert it to electric over hydraulic!

None of it has ever been used, includes:

3 brand new 180 degree round tube dies still in original boxes...
1” with a 3.0 center line radius
1.5” with a 4.5 center line radius
1.75” with a 5.5 center line radius

Degree marker

Haldex Hydraulic Pump/motor mounted to bottom tray, $480 from Northern Tool.

Lion 3000 3” bore, 24” stroke, 3000psi hydraulic ram, $270 from Northern Tool.

Prince detent orbital valve with lever, $105 from Northern Tool.

Misc hydro hoses and fittings to plumb it.

$1,350 OBO

Located in Breckenridge. Must be picked up, and only selling as a complete package, not interested in shipping or splitting items.

Call or Text is fastest way to get ahold of me.
719-205-6427