What Have You Done To Your 2nd Gen Tacoma Today?

I had Cabe Toyota in Long Beach do the install. Great guys. Took them a couple days.

 

No issues at all getting the dash apart. There’s a good write up on here somewhere. I’ll see if I can find it and share the link with ya. Once the dash is apart it’s plug n play from there. Just unplug the harness from the back of the instrument panel and plug in the hypertech then plug the original plug into the other side of the hypertech. Very simple.

Yeah I am probably gonna give the 43 a shot! Love the single stack thickness.

 

Read the instruction page. Pretty easy. I'll order one and give it a shot. Tired of being off 4 mph with my OCD@!@!

 

I have the cover just took the pic with it off.

 

Do you have a diagram for the wiring for using the two way switch?

And is it wired to be able to be turned on at all times or only when the key is in the ignition?

 

I will try to draw something up for a diagram and it’s wired to be able to come on any time.

 

Many thanks!

 

I did the same, bumper and grille and emblem / pyrite mica.

 

@EatSleepTacos documented another alternative.
https://www.tacomaworld.com/threads...native-to-the-hypertech.622313/#post-21311432

 

Carbon sleeves installed on redline hood struts

 

Lets see, this hasn't been today but the last couple of months....I finally remembered to take pictures and post.
Off-Grid Engineering dual side-by-side battery kit with remote switch and dual voltmeter. Prinsu rack with load panels and awning mount. Put on a gun case, ARB awning and Maxtrax. Total Chaos bed stiffeners, Mobtown Offroad tailgate skin/reinforcement plate, Relentless Fabrication bed rail mounts w/Quickfists (for axe and shovel) and took off the SnugTop Rebel and replaced that with an ARE DCU cap. Oh, and a Trasharoo for the spare tire.

 

Looks like instructions on how to defuse an IED!!! The red wire, NO THE YELLOW WIRE!!!!!!!!

 

The final piece to my Tacoma arrived at the house today!!!! Thanks to Joe and Joe and staff and Ambassador Randy at Mobtown Offroad! My neighbor received the bumper and it's tucked into my garage awaiting my return next month! Awesome!!!

 

Ive heard the term drone before, whats that mean?

I like how it sounds on highway!

 

I put my tacomaworld decal in the same spot!

 

drone
To drone is to make a low, continuous noise that sounds like humming or buzzing. On summer nights, you might hear cicadas drone, and on snowy winter mornings, hear your neighbor's snow blower drone, or a Tacoma at highway speed drone.

 

I cut out my letters for my grill. I was going to buy them but I hate buying something I can make myself. I'm on the fence if I am going to paint them black like every one else does or if I'm going to color match the rest of the truck. I still need to color match the main part of the grill. They are crooked at the moment. I just temporarily taped them fast for a pic.

 

i think a color match would look awesome

 

Sexy as hell.