What have you done to your Tacoma today? 1st Gen Edition

Just deleted mine in July. There's a thread on here that mentions part numbers on non abs lines and neither were correct for me. I made the shorter one work and then just reused an old line. I think it was front range offroad that sells a T and union that I needed to retain the lspv.

 

Hydro lock?

I pulled mine off a parts truck.

 

What’s sad is that’s what we call a really clean frame here in northern Indiana

 

Just painted the stock wheels of my Taco to match the bumper and bought after market lugs. Still gotta wipe petroleum jelly off
tireswheels

 

Added some weight to my bed.

 

Correct. From the solenoid back to the Battleborn "house" battery in the bed.

 

Is that the vagabound

 

I drove my Taco 2 miles to work today. It ran good!!

 

Fluid filmed over my problem rust areas that I fixed yesterday, and put the new fender skirts/liners in that I made a few weeks back.



The liners are made of 100% recycled tires and are 1/8" thick. It will work with the factory clips if they aren't broken. Im gonna run to Napa later this week to get some new ones to replace some that I broke. I have enough material to do maybe 4-5 more sets if anyone is interested. Probably sell for around $50 shipped.

 

Wanna help me with mine. I need to do all the same work.

 

For some, the smell of pumpkin spice lets them know fall is here. For me, it’s the unmistakable aroma of Fluid Film...

 

Its all the same little Cambodian kids making them. I guarantee you Smitty,CVT, Tepui, Yakima, ARB.... All get them from the same factory.

 

Oil / Filter change

 

That's a clean ass bay, wtf

 

Ran into a few problems but not a big deal

 

យើងនឹងស្វែងរកអ្នក !!

 

Nice, is that the one from NM?

 

Finally got around to greasing my control arms. All clean and fresh, ready for another year of thrashing.

 

Add new rear lights and some reflective stickers

 

@foxrcing07 and I made some progress on the Donahoe Racing coilovers. Everything is cleaned up inside. Bodies are honed out. Replaced the upper/lower wear bands, the o rings and the upper and lower wipes. Valve bodies are cleaned out and all the shims are re-stacked, bolt is torqued.

I have the upper uni-balls soaking in rust remover/preventer.

Thanks for the help Morgan

... has anyone happened to have replaced the normal DR/Icon fill valve with a schrader valve? If so, do you happen to have the link to the schrader valve that with fit the threads in the DR/Icon shock?