RC Crawlers for sale

#Axial, #Honcho, #Wraith, #Scaler, #SC10, #Exo Terra, #1/32 Losi Micro, 1/18 Losi Mini

Edited: We can swap # for more pics and info. I spoke with the woman at the local USPS and had a several minute discussion for shipping things. “If it fits, it ships” boxes are about $20. Big stuff won’t fit but if I break down the RC into manageable components then I could ship in 2 boxes. Looking at $30-40 for 2 boxes. Slightly bigger boxes were by weight. So in theory, putting a Wraith cage in one of those and the heavier in Flat Rate would come out cheaper. Just a shell game, is all.

I’ve got more than I’ll ever use and need to thin the herd. So, here we go. Most of these were builds and not RTRs. Unless stated, you’ll need a Tx/Rx of your own.

$225+ shipping. $175+S and I keep the steelies and tires.
OG Honcho. Has original axles, tranny, and body. New links, RC4WD stamped steelies with GMade 1903 tires (sweet tires) and CI comp cut foams. Aluminum CMS. I want to keep the electronics off this one for another I have. So, it’ll come as a roller. I have the original bed with tire carrier and the original Ripsaw tires to go with it. $400+ new. LOL.

 

@FLBAdrian

 

Wraith Spawn or Spyder.

One leaves and one stays. You pick. I’ll throw in a spare tummy tuck skid for $10.

$340+ shipping
Cleanest one. Old body but newer cage. Hot Racing aluminum links, 2.2 Deepwoods with CI dual stage, RC4WD 45t motor. 3d printed ‘tummy tuck’ skid. 90mm aluminum Yeti shocks all around. ESC and character stays.





$320+S.
The more used of the two. Original interior. Stainless links by me. Same 90mm Yeti shocks. 21t 550 Traxxas motor. ESC and characters stay. One wheel suffered a broken spoke but I do have another somewhere or you can swap with the DeepWoods for $20. Lol. These Rock Grabbers have CI dual stage and get it.

 

You have an Axial EXO??

 

SOLD

Chinese D90. It’s pretty much the same as the RC4WD one. Close enough parts interchange anyway.


D90 body painted white, seriously. The U.N. aid vehicle. Chinese body and chassis. RC4WD front mount tranny, 55t motor and cheap programmable ESC. RC4WD axles. GMade 1.9 wheels and the smallest Chinese 1.9 tires I could find. Transfer case is a fleaBay. Overall the thing is fairly solid. It needs some more tweaking to get just right but as is you could run several packs through it without issue. I have a servo winch I made but never installed. It’ll come with it. All scale bits except Star Lord go. Star Lord stays put.

 

On a whim traded Exo Terra. I traded basically sight unseen a few years back for this. Traded a Bomber roller and got a Wrexo!?!! Guy put a Wraith cage on the Exo and the Exo cage on his Wraith. It was a yankee winter project of his and he smokes in his hobby room. I finally got the smell out and made the best of it.

$150 shipped
Yeti bumpers and body mounts front and rear. Center diff is 2 part epoxied as locked, GPM CVD rear axles, I used the diff cups on something else but do have new GPM ones still in the bag, Axial Exo shocks all around, m3 grub screw for the motor mount/slide was stripped so I drilled it out for an m4 and use an axle stub(flawless repurpose), and Traxxas Chevron? tires-not glued. Runs like a raped ape on 3s with a decent motor. Body is the Proline f2fiddy I had on my Honcho at one time. So there’s 2 sets of body post holes. Drivetrain is smooth.






Found them.


Found this, too.

 

**SOLD**

Yeti Jr.

$90+ shipping
Chinese 3000kV combo and a bigger servo. Runs like a raped ape also. Slight cogging when starting in grass. Vaterra Slickrock wheels and Chinese tires.

 

***SOLD***


A little conglomeration of mine. Crawls like a freaking mountain goat.

Sum of the parts on this one. $200+ shipping.
R1 chassis, AX10 skid, SCX10 tranny, SCX10 axles, Chinese rear Yeti shocks(miraculously don’t leak), standoff made with carbon arrows, RC4WD 45t motor, AE-5 ESC, and 2.2 stamped HR steelies with CI dual foams in some Rock Grabbers. Links are random Traxxas links that worked out right. If it doesn’t sell, I’ll still drive it. If it does, I do have the hardware to mount body panels with...still in the bag.



I have a half assed build thread here: http://www.rccrawler.com/forum/2-2-scale-rigs/563178-r1cho-scxr10.html

Wrong axles and shocks, it the battery placement is the point. This is the longer of the two packs I’ve shown.




A little velcro strap and piece of double sided tape underneath hold the battery in place.

 

Bone stock RTR Yeti 380.

$325+ shipping

 

Team Associated SC10. It came to me neglected. I rebuilt just about everything anew. As is, as a roller.

$120+ shipping. May split it if it’s outrageous because the body is big.

 

Vaterra Twin Hammers.

$300/330+ shipping.
Chinese motor and Axial AE-3 ESC. TRX wheels/tires but have original somewhere. Will swap or add on for $30. I made these body panels to match my kids old school bus. I have the original as well as some aluminum plate ones. 2 speed works fine and the Tx/Rx come with it. Vertical front mount shocks and I’ll include the original mount and original shocks. The current shocks are from a discontinued HPI SCT and work very well.

 

Hmmm i did want a yeti

 

This is one of the WPL 1/16ish scale rigs.

$120+ shipping for the trouble of putting it together. $140+S and I’ll include another with the red body Yoder, bed, camper, and brass geared axles.

I tossed the junky drivetrain and put a set of Slick Rock axles(not easy to find BTW), an amazing 360 planetary coupled to a 1:1 transfercase. Too much servo. RC4WD 1:18 scale shocks. RC4WD 1.55 stamped steelies and the Yeti Jr BFG tires. It works decent. More cool points than crawling ability.

 

is this RTR with radio? anything needed to make it RTR? Thanks

 

No, but it can be ARTR for another $30. I don’t have the original Nimh battery but it was junky. This is 2s lipo ready. ESC claims 3s capable.

 

Damn, I've always wanted a crawler. The first kit I built was an axial exo terra, thing handled like a champ. Was too much of a P.I.T.A to keep though....

 

I have been wanting one of those for a while...i was hoping his was a straight up EXO

 

Here’s a bunch of Losi 1/32 stuff I’ve accumulated over the years.

$250+ shipping for the lot. There’s enough for 3 rollers.

Here’s enough to make a High Roller chassis. You won’t find these anywhere.


2 sets of threaded axles(if you know, you know), a diff, some pinions, complete suspension parts bag, wheels. What?


Unopened DT body. Found a Mini Cooper with nearly the same wheelbase once upon a time. It’s doable.


3 chassis’. One High Roller that’s ready to roll. One slider and one I’ve hacked up to use the 1/24 spindles(never finished it). All have complete trannys, BTW. I should have an eye poker AM Tx somewhere to make the one run. Also may have a motor or two. 1 brushless and ESC somewhere as well.


Solid black bicycle handlebar foams. It took a long time to find these. They make excellent drift tires.


Bag of screws and an RPM front bumper.


I’ve got a set of High Roller wheels and tires. They’re real old. The rubber is toast but the wheels are good. They were intended to get the black grip as drift tires.

 

@Silverspool , @Suprajim54 , @Zac of all trades

 

I am so tempted SOB