Georgia Classifieds

Damn wish was a 2nd gen

 

Drawers are ready.

https://atlanta.craigslist.org/nat/pts/d/buford-4runner-cargo-drawer-system/6993857962.html

I think @CountryDan had interest in the last one. Of course, the TW price can be lower.

 

Not compatible with BSM......... damnit!!!

 

Dont need, but could be interested.

 

I have the ECGS Removal Tool available for $30. Located in Murrayville but travel to Cleveland, TN weekly.

 

Very nice! And tempting like last time. Baby #2 on the way so the 4Runner build is halted again, but for good reason.
Thanks for tagging me

 

Good deal and good luck! Though that diaper changing pad will come in handy

 

Anyone have OME’s up front and need a trim packer?

I went with OME 885’s on Bilstein 5100’s

 

I may could use those, the Honcho was pushed hard yesterday. Has a bit of a lean to it now!

 

I'm assuming that's for the taco lean? Mine is off about a half inch. Not sure what direction I'm going for getting a lift or not. How much you asking in case I decide to stay stock? Thx

 

Yes it’s for taco lean when using the OME front shocks. $5

 

Ok thanks. I still have OEM setup. May stay with that or go with bilstein 5100's

 

I also have a 1/2 top plate spacer that’ll work for a stock/5100 setup. Lots of junk at the house I’m trying to get rid of.


Anyone want a bed extender? LOL

 

The set of spacers or just one?

 

I think I may have one of these as well, but may have already given it to someone. I'll have to look to see if I can find it. If so, anyone can have it for free. Marc might be closer and $5 might be cheaper than gas getting over to me.

 

Price drop. Bump

27,500

 

Is the spacer actually a 1/4" thick for the taco lean and what type of bed extender?

 

The 1/2 inch spacer is 1/2 inch and provides same lift (placed on top/out of strut assy). The OME spacer is maybe 1/8th but is placed inside the strut assy creating a 1/4” lift.

The bed extender is American made. That’s about all I can remember. It’ll be a few days b4 I can tell you much more

 

The $5 is more of a show up guarantee

Just one 1/2”. In case you have a 1/4 on driver side and still had lean or wanted to do 1/2 on driver and 1/4 on passenger for a bit more lift

 

Gotcha. Thought I read where the spacer for taco lean was 1/4" thick but gave 1/2" lift on the drivers side and I've been thinking about getting a bed extender but want the one that comes straight out of the bed on the tailgate instead of an angle. Had one on my f150 and like that style as it allows more room inside the extender. Thanks for the info and pic.