What Have You Done To Your 3rd Gen Today?

Where’d you pick up that gallon? I have only seen it in quarts around here.

 

My knees are bad too. This also helps especially if you have any kind of bed cover and was well worth the cost for me...
https://shop.agricover.com/product/cargoreachingtools

 

How did you tint your tail lights? I am thinking about doing this and running Meso LED kit in the back. It might be too bright without light tint.

 

I should have worded that differently. I do have arthritis in my knees, i have a bed step for getting in.

My issue is crawling in the back on my knees on the hard lumps. The mat is softer. I have a bunch of tools and parts etc in the back at all times so i keep the every day stuff near the gate. It's when i need my parts bins that i have to crawl in

 

Got it on Amazon here:

Red Line 57905 75W90 GL-5 Synthetic Gear Oil for Hypoid Limited Slip Differentials - 1 Gallon

https://www.amazon.com/Red-Line-579...1570578284&sprefix=Redline+75w,aps,195&sr=8-1

 

How many miles are on your truck? Wondering at what point I should do this.

 

Not my truck but my last 3 vehicles I’ve applied VHT Nightshade over the tail lights. Got sick of getting rear ended, 3 for 3. Be careful, it does look good though.

 

Doing them this way does not change the light output. Everything is done inside and lense is kept stock. A lot of work but worth it to me.

 

Finally got my Meso stage 2 shifter on and working. Had to splice two harnesses but it's probably better than it was.

 

3rd pic looks sprayed on the outside . Do you have a better pic and how hard was it to open the tail light ? Btw I did led plate light . Im scared it’s gonna be super bright .

 

Did mine a few days ago.

 

Here's a better pic of the one that looks sprayed. Also added the Meso page I followed to get them apart. The person who just purchased the set I made posted the other day. These on my truck are Meso Custom Led tails.

https://www.tacomaworld.com/threads/3rd-gen-btlm-led-retrofit.467712/

 

I did my front, rear and transfer case at 30k
I’m at 50k miles now and was just gonna do it again.

 

Thank ya sir.

 

Ahhh ok I remember those tails . Thanks for the response. Looks good

 

Thanks, the ones I made look just like Meso's when they're off but no comparison when they're on.

 

This is what I typically see or hear as an answer to that question...

 

Nope.. and their only help was here's the wiring diagram you can Google online -_____- my cheap Amazon rocker switch with an led lorks fine. Kinda disappointed. Might fuss with it again eventually but for now eh it's just aggravating.

 

That's awesome. Congrats and enjoy.

 

Finally installed front camera and cs solution.