San Antonio

Good evening Josh

 

Are you going to San Antonio cars and coffee

 

Nope, but since they blink,I would look in the relay / fuse panel. I think the fogs have a relay. Mine are still wired standard (have to have headlights on). A relay that won't hold would be (bad coil) a likely culprit.

 

Good evening, Brandon.

I'm about 50/50

I'm 'tarded. I left the high beam on, which is why it wasn't turning on lol.

 

I'll check with you Friday night about Taco meet before SA. I am going. Got stuff to give and get!

 

Sweet!

 

I know it's a haul for ya! And I have to leave a little early to make sure I'm home for Texas/OU kick off at 11! Because it's 10:38, and OU Sucks!

 

Aftermarket switch or factory

 

Need that fog light always on mod

 

Factory. I don't like hacking the stock harness. That introduces potential problems.

I've thought about it, but I'm just going to leave it the factory way.

 

I want to turn my front turn signals in the parking lights on the 05 06 tacomas they were just turn signals but on the 07 and newer tacomas it's a parking light and turn signal

 

That'll take a little rewiring.

 

I'm going to go cuz I was going to go to my friend's house after and do some modifications to my front bumper that way those big ass lights that I got will Mount properly

 

Which lights?

 

I know somebody did a write-up on here on how to do it but I hate doing electrical work

 

Same lol

 

I know if I do electrical work to know there will be shorts and freaking a fire somewhere

 

These big ass lights

 

The mounting brackets for those lights are real wide and I'm going to have my friend weld a flat plate to that tube top tube that way I can screw that mounting bracket to a flat surface and he's going to weld a plate on the front that way I can mount a license plate

 

I agree with messing with the standard wiring for mods. My little LED DRL are simply tied in to those parking / marker lights that are not worth much. But that little section probably is NOT designed to take a higher wattage (even LED) in that small compartment.

Factory fog wiring is perfectly fine for me, tied to headlight switch, and if you think about it, probably for most of you with bumper mounted lights - you can always just wire up some off road fogs to an anytime. One the road, you DON'T want Hi-Beams and Fogs - hence Josh's "issue".