Norcal Spotted and BS Thread

I'm needing a fuel jug or 2 for the garage (for weed eater, blower, spare gas for boat, etc). Hate all the California Air Resources Board bullshit. None of them work correctly or efficiently. Anybody have any recommendations? What do you guys have? VP style cans? Jegs? Jerry Cans?

(Most of these are not even available to ship to California but looks like you can purchase about anything on ebay)

 

I like buying mine in Reno for that very reason.

although my last gallon canister I was desperate and bought locally. It’s a pain but not as bad as I thought it would be.

 

Jesus Christ so many people don’t know how to drive in Napa with the lights out. Seen so many people almost crash. So many people running lights like “if it’s off it must be green.”

 

We lost power at the main branch. We were suppose to lose it here in winters. Still here. Most the town is closed. So we had ceviche. Such a hard day at work

 

i need to go up and have lunch one day since you're so close to me now. Or i can drive by real slow on the way to the lake and you can just jump in the boat....cooler is stocked.

 

And power is out.

As of 3:30pm.

 

Come to Clearlake instead. kthxbye

 

I have power at work too... But I hope the base has power for what we do.

 

Driving threw the cloud line this morning.


Then stopped and found some snow.

 

I have power at work too...

Up to ~500MW at a time!

And none of our wind forecast told us to stop distributing power but we’re pretty local to this area.

 

Surprise they don't shut the power down in other states for the same reason. Been hitting monsoon winds 40+ since yesterday.
Nevada, Oregon, Idaho, and lower Washington. Finally mellowed out below Spokane.

 

Just drive by and honk, don’t break tradition.

 

plan B please..... I have to make sure this gentlemans boat and cooler are working properly if we are going to finance it....seems legit

 

That’s called “The Anderson”...

 

Good beer

 

Lost power at 1am came back on around 8 am. Brother in-law 2 1/2 miles away power still out

 

Quick question for those that have swapped out their front diffs. I just swapped the tube from my stock clam to the ecgs. When turning the driveshaft by hand only the driver side axle splines turn. The passenger side is not rotating.
I transferred the stub shaft over per the instructions and mounted the tube back on. I’m guessing the actuator needs to be active for the passenger side to spin? Just want to make sure I didn’t screw something up before putting this back in the truck


Edit: after reading on how the a.d.d system works this seems normal as only the driver side axle turns in 2wd. The passenger side has a collar that is electrically activated when put into 4 wheel allowing the two piece shaft to become one and this turn the outside shaft.

 

Now when I hear it and don’t see you I ask “Ford or Tacoma?” When someone in the office asks wtf

 

https://sanfrancisco.cbslocal.com/2019/10/09/power-outage-meals-on-wheels-volunteers-worried/

damn