What Have You Done To Your 3rd Gen Today?

Yea. At 140/194 MPH wouldn't feel a thing. Neither would the little kid on the bike? Not you, just putting it out there.

 

That's why they make race tracks. I drive like an old man in town, plus I drive a Tacoma.

 

Wishing for a speedy recovery. Best of luck.

 

You know Craig, you live in Louisiana there must be many opportunities to paraglide, zip line, long line parachute behind a boat that will get you the rush? If that is what is needed? You know that a little Parasail with a little motor will get you to about 1500 feet elevation? Plus not cost $89,000 to start? Now that would be a RUSH! I think. Just a thought.

 

Too many mosquitos in Louisiana, JK. Never been paragliding but I do the rest of the things. I'm surrounded by water at home & work. I used to do ALOT of boating, just not as fun anymore. I live half of my life on the water that I cannot get away from when at work. It's the life I chose, no complaints. Just doesn't interest me as much. I also fly in helicopter on a regular basis for work too, probably log 100-120 hrs a year. I've had sports cars, trucks, family cars, etc. just want a Vette to play with. Can't afford a 1967 Vette w/ a 427c.i.(my dream car), so the 2021 is doable. Just another toy like dirt bikes, boats, campers, and Jeeps. Still gotta get the kids out of school first.

 

Wish I still had my 63 Corvette! Damn, 327 in it and ported and polished. 360hp. Four on the floor. Geez. Oh well. Hard top split window.

 

Another beast

 

I lost a quarter somewhere between the seats.



Found it!

 

Maybe a little more than a quarter? Me thinks.

 

Any guide on removing the clock spring?

 

This scares me and excites me at the same time. Can't wait to see the finished SEMA version.

 

Always hard to follow a Meso post.


Messing with the front end a bit

 

For the grill I was lazy and tapped off around the grill and removed the toyota emblem.

Always leave around an inch or so border around the area you want covered. That way when it dries you have something to start peeling from. Newspaper for overspray. Dont worry about alittle overspray if it happens, just let dry and wipe it off with a microfiber towel.

Do at least 8 coats, 10min between coats and 30 min dry time before peeling. The more coats the better.

Alot of youtube videos out there for good reference. Hope this helped.

 

Ppl who installed front cam mod - where did you run the wires from front grill cam to dashboard?

 

That is very retro 1985 SR5 cool.

 

Thank you Brian.
Welcome to TW!

 

Yes. 2/3.5

 

Link on build?

 

Don't have one

 

I ran mine down the drivers side, used a metal coat hanger to punch through the bottom of the rubber boot that houses the wiring harness that comes out under the dash then under the dash to the head unit. Very easy.