Ray 10s on stock suspension & 265-75-16 ko2s

Thanks @commbubba19 , that is with stock suspension? A lot of info on here with a couple inch lift not causing issue, doesn't seem like a ton of info on stock suspension, although this video is in fact stock, so I have some faith there at least!

Looks like i'm shopping for some 265/75/16's lol... glad i missed all the LDS deals

 

yep, no lift for me for awhile. no need.

really a 1-2" lift only helps to clear big tires on the street. the front wheel wells don't allow for flex with big tires which is why most start cutting into the cab mount, flatten pinch weld, cut flares and push the caster forward and then cut up the lower front bumper.

 

I haven't rubbed on my stock setup ever since I took my front flaps off

 

Current picture

 

I have 12k on my 265/75/16 ko2s with my ray10s on stock suspension. Wheeled them pretty hard and no problems with rubbing at all. Only when I turn into my driveway too fast. @offroad.taco on instagram for some pics

 

Thanks! Just checked you out, looks awesome, I might just have to do it, sounds like worst case some slight cutting or heating, but I don’t do much heavy wheeling anyways so should be good.

 

where does it rub? thinking of the same set up...but dont want to do a lift. did u end up getting a lift?

 

Sorry to bring this one back! Anyone know if the 265 70 16s tires rub on the stock suspension set-up?

 

Rubs front mudflaps and slightly on front fender lining in reverse....remove front mud flaps & slightly heat gun fender liner for the win!

 

265 70 16 no rubbing

 

Sorry for the ignorance but what size ray 10 would I need to run a 265/70/17? And also how much rubbing /trimming would I need to do with no lift?

 

17”

None, unless you have mud flaps.

 

@90yota got any more pics of your wheels on 265/70/17? Thanks

 

I dont. That was years ago.

 

I'm getting my ray10's mounted next Tuesday with Falken AT3W 265/75/16. I'm taking the front flaps off hopefully I don't get any serious rubbing. Stock suspension.

 

Pics?

 

I just mounted 16x8 Ray10s on 265/75. I went with RokBlokz flaps because I like the look and protection. I had to heat gun the front wheel well liner, rear location. I was contacting when fully locked.

The contact/rubbing is gone now but I’m going to keep an eye on it to see if certain scenarios produce a rub.

I really wonder how this is going to do off-road. It has me contemplating a moderate lift, like 5100s/887s and AAL.

I can post a pic after heat gun if anyone’s interested.

 

Yeah I just had a pretty rough rub on the passenger side, turning right into a drive. I gotta figure out what to do.