What Have You Done To Your 3rd Gen Today?

very nice!! Got the same bed side decal on mine after seeing how great they looked on your Tacoma.

 

Great shop,great service, I highly recommend you guys. Prinsu rack next.

 

Appreciate the kind words!

 

I did;
1)layer of NOICO sound deadening
2)1 layer of Peel and Stick ENSOLITE
3)1 layer of MLV(tucked under OEM mat)

 

hmmmm. Looks bad ass. Any rubbing? Wondering if I went that large if I’d rub. My current set up is 255/75/16 with 2” spacers and a 3” lift

 

Yes a little rubbing on the cab mount but only when it’s pretty stuffed off road. And only on the passenger side I did cut a lot of stuff to clear that tire size. Pretty much just cut everything lol

 

That is correct! We do have sliders lots of sliders in stock ready to ship and if we do not have them it will be a 3-5 day lead time! No need to wait month and months for your sliders!

 

Damn. 285/75/16’s are in my future then

 

Hahahah! Good call man

 

Did not know that. Thanks for the clarification. Learn something new all the time on TW.

 

That piece of mind mod...



That tab I had to pull out, it broke but the lock still fit in flush haha

 

Did apply it to just the floor, or did you do firewall, back, and doors too?

 

Truck looks really clean, How did you black out the fog lights?

 

Lift and tires today. Going to pick up rusty right now. Pics a little later.

 

Just put new tires on.
Falken Wildpeak AT3W 265/70/17

 

Falken Wildpeak AT3 265/70/16
R/R Chrome ring in the front grill to black
Letter Black out with over lays
ProComp 65205K Lift
No rubbing and drives like it did when I dropped it off.

 

To all new Taco owners that wish to oil/ under guard etc. the truck before the 1st snowfall and are thinking of installing the Pop and Lock for the tailgate, make this your 1st mod. I finally got around to installing today and it took hours instead of minutes just because everything was covered in oil. I had to continuously wipe my hands in order to keep from getting all my tools dirty and from contaminating the wires. I was not able to line the tailgate with any sound deadener because of the excessive oil but did put a layer of foam(laminate flooring underlay) between the actuator and the bracket as well as a 1'x2' layer above the lock on the exterior of the tailgate.

 

I went the DIY method for about $20 and only took about an hour, including making my own mount solution and pull.

I also didn’t have the grease issue you seem to. Not sure what the hell they did to the inside of your tailgate?!

 

I'm in SW Ontario and there is salt ready available under Lake Huron so they have been spreading it on the roads in the winter for about 75 years now. No smart vehicle owner would go without oiling/ undercoating their vehicle each year to keep the rust gremlins away. Mine is WELL oiled.

 

Glad we don’t do that nonsense here, although I could do without the summer chip sealing.