What Have You Done To Your 3rd Gen Today?

Did not know that. Thanks for the clarification. Learn something new all the time on TW.

 

That piece of mind mod...



That tab I had to pull out, it broke but the lock still fit in flush haha

 

Did apply it to just the floor, or did you do firewall, back, and doors too?

 

Truck looks really clean, How did you black out the fog lights?

 

Lift and tires today. Going to pick up rusty right now. Pics a little later.

 

Just put new tires on.
Falken Wildpeak AT3W 265/70/17

 

Falken Wildpeak AT3 265/70/16
R/R Chrome ring in the front grill to black
Letter Black out with over lays
ProComp 65205K Lift
No rubbing and drives like it did when I dropped it off.

 

To all new Taco owners that wish to oil/ under guard etc. the truck before the 1st snowfall and are thinking of installing the Pop and Lock for the tailgate, make this your 1st mod. I finally got around to installing today and it took hours instead of minutes just because everything was covered in oil. I had to continuously wipe my hands in order to keep from getting all my tools dirty and from contaminating the wires. I was not able to line the tailgate with any sound deadener because of the excessive oil but did put a layer of foam(laminate flooring underlay) between the actuator and the bracket as well as a 1'x2' layer above the lock on the exterior of the tailgate.

 

I went the DIY method for about $20 and only took about an hour, including making my own mount solution and pull.

I also didn’t have the grease issue you seem to. Not sure what the hell they did to the inside of your tailgate?!

 

I'm in SW Ontario and there is salt ready available under Lake Huron so they have been spreading it on the roads in the winter for about 75 years now. No smart vehicle owner would go without oiling/ undercoating their vehicle each year to keep the rust gremlins away. Mine is WELL oiled.

 

Glad we don’t do that nonsense here, although I could do without the summer chip sealing.

 

Not what I did today... or at least not yet.
I bought some of this Techron complete fuel system cleaner. Never tried it but the dealership wanted almost $500 to clean. So what do you guys think. Stuff any good?

 

I'm originally from Chicago, so I'm very familiar with salt and what it does to car bodies. I've been living in Dallas/Fort Worth for 30+ years so I kinda forget the salt issues up north. Just the other day I commented to my wife how all the vehicles here look so clean.

 

New basket on my truck. I added a Yakima OffGrid Medium size rack to the top of my CBI racks. Quail/Duck season starts next Saturday. I now have room for dog crate(s) below and hunting gear above.

 

@MESO BD4 NMO. Easy install!

 

I've used it many years in my cars, trucks and motorcycles, mostly as a preventative measure.
Heard a lot of good things about it but I have no scientific proof other than that I've never had a fuel system related problem.
It's cheap insurance relatively...IMO.

 

Did some exploring in the desert. Debating getting a roof rack next.

 

@tandemgeek very good advice. Thanks for getting into details about your experience with sounds deadening and showing us the pictures of how you laid out the material. I’m planning on insulating the cab in the near future and will probably reopen the tailgate to line it with left over materials.

A few open questions to the group:

Is there a way to get ARE remote locks beside the dealer? cost? Install?

Sound deadening; Aside from the audio benefits, have you noticed better climate retention? Any other side benefits? Detriments?

somewhat unrelated, but related in the sense of taking the interior apart so I might as well squeeze in side projects;
Is anyone using the Beat Sonic RCA input adapter? I’m wanting to install an SNES mini if this thing works, otherwise I might consider some raspberry Pi solution.

https://www.beatsonicusa.com/avc39.html

Thanks in advance

 

TF is that?

 

Got the " SHELF " about done. Need to install lights down below. I'm old, I'm a hook and slide kind of guy.