1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1/4" Toytec spacer install?

Discussion in 'Suspension' started by Fabulous, Sep 15, 2010.

  1. Sep 15, 2010 at 7:57 PM
    #1
    Fabulous

    Fabulous [OP] Well-Known Member

    Joined:
    Jul 17, 2009
    Member:
    #19807
    Messages:
    860
    Gender:
    Male
    First Name:
    Fabian
    Calgary, AB
    Vehicle:
    2017 Tacoma double-cab TRD Sport
    TRD Pro grill and fog lights, Toytec Boss lift, 265/70-17 Duratracs on 17 x 8.5 FN Verge wheels, LEER canopy, 30% tinted front windows.
    I put my lift in a week ago, and I have my alignment on Friday...so I went out to measure the lift, and it looks as though the drivers side did end up about 1/4" lower than the passengers side :( To install the Toytec tacolean spacer, do I have to pull the whole assembly out again? Like remove the sway bar all over again, and pull it completly out? It would be a major pain in the ass if I had to, but if I have to, then I have to...
    Anyone have any ideas?
     
  2. Sep 15, 2010 at 7:58 PM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,531
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Yeah, You have to set the spacer on top of the spring/;shock assembly.
     
  3. Sep 15, 2010 at 8:13 PM
    #3
    crf69

    crf69 scraping my emblems off my plasti-dip

    Joined:
    May 18, 2010
    Member:
    #37348
    Messages:
    3,578
    Gender:
    Male
    First Name:
    Ryan
    Ohio
    Vehicle:
    06 TRD OR BSP cab'n 1/2
    ummm yeah
    put the spacer in before you realign
     
  4. Sep 15, 2010 at 8:13 PM
    #4
    ColtsTRD

    ColtsTRD Well-Known Member

    Joined:
    May 13, 2009
    Member:
    #17177
    Messages:
    17,884
    Gender:
    Male
    First Name:
    Scott
    AZ
    Vehicle:
    2005
    x2
     
  5. Sep 15, 2010 at 8:57 PM
    #5
    Fabulous

    Fabulous [OP] Well-Known Member

    Joined:
    Jul 17, 2009
    Member:
    #19807
    Messages:
    860
    Gender:
    Male
    First Name:
    Fabian
    Calgary, AB
    Vehicle:
    2017 Tacoma double-cab TRD Sport
    TRD Pro grill and fog lights, Toytec Boss lift, 265/70-17 Duratracs on 17 x 8.5 FN Verge wheels, LEER canopy, 30% tinted front windows.
    I figured as much with the install prior to align...just wondered if I had to pull the whole assembly back out. Guess I'll be back in the garage again tomorrow night.
     

Products Discussed in

To Top