KB Voodoo Crossbars for Tonneau Covers - IN STOCK!! (redesigned for RTT's!!)

Thanks! Fixed it by Adding extra washers

 

Hello everybody! Question for those of you running these bars with an RTT. Any of you guys/gals getting a really loud annoying squeak sound when driving and or opening and closing doors? The bars have been triple checked and are tight. Im at a loss as to what could be making this sound. I should mention that this morning when it was colder and raining the noise went completely away, now that everything is dry and hot back to making a ton of noise. Any help/ideas as to what may be going on is appreciated. I did reach out to Chad, and didnt get very far with that other than make sure everything is tight.

 

Would these work with the BAK revolver X2?

 

No, but our TACO Max racks will: https://www.max-modular.com/shop-max-modular

When used with these special brackets: https://www.max-modular.com/shop-max-modular/tonneau-brackets-bakflip

 

Awesome!! I’ve been looking to do this for a while because I’ve wanted a RTT. Don’t know why I’m just finding this thread lol. Thanks!

 

I just ordered the max with the BakFlip brackets and it arrives Tomorrow. I have my RTT and I’ll let ya know how the install goes.

 

Any update?

 

I haven’t installed yet as I’m caught up in another auto project at the moment. I will def give you a full run down within the week. I have all parts in my possession including the tent.

 

I’ve been looking for roof rack or something like this for months. So glad I found this. Will be ordering !!

went to order and what works better? The screw knobs or the tamper resistance? Have the tamper been upgraded? (Read previous post you could not get these right).

 

Not sure what you mean. There are no issues with the tamper resistant screws.

 

Dam spell check. Not right. I meant tight. Lol

 

There are no issues with getting them tight.

 

you are a savior thank you

edit: when you remove the crossbars will the brackets interfere with the lids opening?

 

Nope, it will be clear to fully open.

 

@KB Voodoo

Can us Bakflip guys get some love and get these released or special order ?

Or make a crossbar that will work with the Modular Bakflip brackets ?

I want to carry my bikes and still have access to the tonneau.

Would buy in a heartbeat

 

@KB Voodoo what's the width of the bracket? Want to know if it'll fit under a Diamondback's middle panel.

 

They are 6" wide.

 

Correct me if I’m wrong but the BAKFlip MX4 will not work with the high rise cross bars due to the relocating bed rails

 

If your rails have been relocated.

The only thing we have that will work is our Max Modular bed racks: https://www.max-modular.com/shop-max-modular

You will also need our special brackets: https://www.max-modular.com/shop-max-modular/tonneau-brackets-bakflip

 

I'm considering using the KB Voodoo high rise crossbars with a Diamondback HD bed cover. My initial goal is to be able to haul a kayak with a future goal of supporting a roof top tent (eventually, a more challenging goal to find a way to do both simultaneously). I've been looking at Yakima kayak mounts/racks but it looks like most of them mount over Yakima's rounded bars and/or are designed to work with a crossbar with a t-slot.

Since I have the short bed, my initial idea is to use one of the high rise crossbars with the Yakima LongArm. For the most secure fit, I want to mount a kayak mount to the KB Voodoo crossbar and Yakima LongArm as opposed to just having them rest on bars. Yakima's mounts obviously work with their own products, any tips for mounting these to the KB Voodoo crossbars? I am unsure what types of accessory mounts I can use with the KB Voodoo crossbars since many are designed to wrap around rounded bars or use t-slots.