What Have You Done To Your 3rd Gen Today?

Cleaned up the Hi-Lift option for my rails on my Decked system. I didn't want to drill holes into the Decked unit which would cause leaks (I know it is under a canopy... I am in a very wet climate and wet gear is thrown in the back all of the time.) I wanted to get my Hi-Lift out of the drawer along with shovel, axe, baseplate, and UniJack.

Solid as a rock, super happy with how everything turned out. I had to cut a notch into the baseplate a little bit in order to fit around the cleat in the bed. I also used the Dominion Off Road Hi-Lift shovel and axe mount.

Now I just need to figure out a way to get my maxtrax onto this pile of recovery.

 

Don't forget to put that little vinyl sticker over the lock! Keeps the dirt out so not to plug it up!

 

Egr flares good sir...they install super easy right over your factory flares no damage

 

Do these also have the amber lights in them that indicate when your close to something on either side of the truck

 

Not sure but did you notice that sweet white taco in the background telling you what to replace it with if it is totaled

 

Alright guys, need some help. Recently got a new steel bumper after I was rear ended As far as wiring the new license plate lights that came with the bumper i'm running into some issues. The old license plate lights have a connector and that plugs into the wiring inside the bumper. With the new license plate lights there's no connector and i'm just left with one red wire and one black wire. But where i'm confused is one end of wires inside of the bumper is white/green and the other end is blue/white? Which should the black/red connect to? I cut the wiring on the inside of the bumper on one end and tried using bullet connectors to connect them and neither way works no matter which way I connect. This is nothing like wiring in a house so i'm stuck lol. Here's some pics to get a better idea of what's i'm dealing with. Thanks for any help.

 

So the red and black are from the truck harness? Can you check to make sure power is getting to them?

 

WOW,
That's a pretty clean Desert!

 

Please please link me and or give directions on how to do this

 

Take off grille.
Spray with plastidip
Reinstall grille

 

Where can i buy this lol

 

I pee’d on my 3rd gen a little today, was windy and

 

Fixed that bad boy for you

 

I put Rav4 mirrors on my 2019 SR5 about 6 weeks ago, and I really like them.

No, they do NOT have Blind Spot Monitor indicators. But they DO have the heating elements for heated mirrors.

 

I did the same. Lights up the U.S. flag decal on the door real nice

 

I took my walking stick and knocked the cobwebs out of the fender wells today.

 

Finally set up my tepui ruggedized autana tent on some allpro bed bars.

 

Lmfao

 

Did you yell at traffic to slow down while you were out there?