Used Fox 2.5 Front + 2.0 Rear - both with resi

These came with my truck and are overkill for the driving I do. I've decided to sell instead of rebuild and hope someone can put these to good use.

EDIT: These provide about 3in lift with current setup (please note they'll need rebuilt first)

Front -
Fox 2.5 Coilovers with reservoir
600 lbs/in springs, but they'll probably need replaced
Carbon fiber resi covers
Fox adjustment wrench included

Rear -
Fox 2.0 with reservoir
Aluminum shock to resi holder


Now, please look closely at the pictures. These things are toasty and were used for awhile. They have quite a few miles on them, obviously in desperate need of rebuilding. I believe the fronts have around 70k miles and the rears around 80k. Mainly highway use but unfortunately in the salty midwest.

Rebuilding quotes I got started at $125/each without the need of additional parts. I'm certain these will need some more work done to get them to spec, however people say they can be rebuilt.


Asking $450 picked up for everything
(Shipping on your dime)

Location: Metro Detroit, Michigan - Zip 48188

 

Willing to part with that spanner wrench?

 

I’d be interested in the 2.0 rears if you decided to part.

Also could you possibly measure the extended length of them? (Top of lower bushing that’s on the frame to the center of bottom eye)

edit: if willing to ship, @Dropitmore and I could probably share a box, as we’re both in Southern California

 

Sorry, keeping the wrench with the coilovers for the next owner.

You got it, I'll take a measurement today after work! I do not believe they are extended travel but I honestly never checked.
Shipping the rears wouldn't be too bad, I'd separate for a good offer. It's the coilovers that would be a boatload to ship

 

Interested in if you decide to part the set. Will take the front coil overs.

 

Is that massive amounts of dirt and gunk in the body due to the shocks leaking or is that rust?

 

*Sorry guys, I forgot to measure the extended length last night. I'll do it this evening!

Cool, I'll keep you in the loop. If I can get takers for the front and rear I'm happy to split.

Sadly it's quite a bit of both. They have a bunch of oil and undercoating on them but they are quite crusty too. I never bothered to clean them since I know they need rebuilt

 

Alright I think this is right...Looks like it measures right around 25.25" from the top of the lower bushing to center of the eye.

 

how much are you asking for the rear resis?
willing to ship?

 

sorry, meant to tag you

 

PM's all replied to!

 

This crap looks like it should be scrapped

 

Hey man no need to bash, if you don't want them then move along. Thanks