What Have You Done To Your 2nd Gen Tacoma Today?

Noticed the headlights were looking a little haggered.



Hey, the Taco was a little grundgy too,so...




That's a little better. Ok, time for a cold one.

 

Sweet Looking Truck!!

 

Removed the shark fin and wrapped the roof with protectant vinyl.


Will replace the shark fin with a smaller GPS antenna, and will throw my Front Runner Outfitters cab rack back on it this weekend.

 

Do you have a link to that stubby antenna?

 

Here's the write up I used. Got the Antena from a toyota dealerships online portal for $50. My local dealer was trying to charge $100

https://www.tacomaworld.com/threads...shark-fin-with-a-oem-satellite-stubby.552228/

 

New shoes today. Decided to try the Falken Wildpeak AT's in 265/75-16.

 

Thank you. This site has given be a lot of ideas on mods

 

Thank you. I like the way they turned out. I can’t take all the credit on the headlights tho. I had Kustom54lighting build them for me. They did an amazing job.

 

those 4 Runner rims/tires look good

 

Thanks man, scored 'em on CL a week after I got the truck last Feb.
800mi w/tires, lugnuts & sensors, cheap! Taco came w/steelies so it was a major upgrade.
Like to have bronze F-5s one day.

 

Well, maybe it's just me, but jacking up a Tacoma weighing several thousand pounds on a jack that has a 4.5" x 4.5" base just makes me a little uneasy, especially if it's in the dirt. This evening I took some scrap 2' x 12' and sandwiched it between two pieces of 3/4" plywood and built a small platform. The jack is secured by 3/8" bolts that are countersunk on the bottom to avoid any rocking. Storing the platform and bolts behind my rear seat, ready for use.

 

Nice work and detail
I'm lifted 3" and 2" taller tires, I wonder about my jack lol, I tow a boat regularly and always throw an aluminum high lift jack for safety and convenience, but I don't want it all the time.

 

Does anyone know the biggest after market bottle jack that can fit in the stock bottle jack location?? Anything has to be better than the one provided

 

When I lifted mine 4” I knew the crap jack would never be used, and I didn’t want a hi lift, so I went with the 6 ton Safe Jack with all the extensions and a base plate. The 6 ton jack and all accessories fit under the back seat and the wide base plate is on the molle panel in the bed.

 

They look good on a White Truck too

 

right on, those are 17" rims?

 

Yes Sir off of my Son's 2017 4Runner. he took them off and asked if I knew anyone who wanted them.

 

Finally installed my lightbar over the weekend but forgot my dang push-button wiring harness so i used the Micro-tuning switch. Gonna replace/re-wire it this weekend

 

Nice set up, but that's alotta jack lol

 

Yeah, a bit o’cash but no other way to lift w/o a high lift.