New England B.S. Thread

How many miles do you have ? The exhaust on these trucks are horrible, I have a leak post cat and it's a 17!! Good luck with your repairs, hope the o2 sensors dont need replacing.

 

Throw on Doug thorley y-pipe and eliminate 2 of the 4 O2 sensors.

Plus 02 sensors are cheap, like $40 on Rock Auto for denso units.

 

Anyone else doing the ENH fall crawl? I'm doing stock group in the Landcruiser since the only armor it's got is sliders ( and soon Slee elocker actuator guard).

 

Last time I had that code, it was a bad catalytic converter.

 

Some vehicles look really good in white, some don't. To me, the Raptor isn't one of them.

 

I agree, it doesn't scream "look at me! Look at me! I have a raptor!" It gives the owner more of a sense of knowing what the truck can do in the back of their mind about being boastful towards others. I look at it as a person who is a third-degree black belt but doesn't boast about it knowing that they can throw down but doesn't have to warn people.

 

all of Wilbraham was without power since 10 PM last night and schools were closed today

 

Seth, I'll see you there. Running stock friday night. Mod runs sat and Sunday, have an open seat if you want to do a mod run. Met Kc88 out of the blue locally and he said not to miss out

 

Most look like fleet trucks if they are white. When I had the cap on my truck I kept thinking of the Orkin man and their pest trucks. Love the Toyota Super white tho

 

Have you been to a fall crawl before? They are awesome. With your taco doing moderate you'll need skids plates. Just based on length of the truck you're going to use them.

I'll have my daughter and puppy with me, so I'm just doing stock Saturday. I've done the majority of the typical fall crawl routes and they are a blast. Definitely expect to use your armor though.

 

That was my hope since I didn't appear to have a leak but it got plugged and patched from inside out. my guess is the tip of the screw probably just broke through. Could I have gotten taken for a ride? possibly...but ability and knowledge of plugging a tire myself is currently zero so is what it is I guess now.

 

Without saying too much, roughly where's the fall crawl taking place? If it's in my backyard again I might just go out elsewhere haha.

 

There are so many wordplay jokes in these two sentences I'm not even gonna go there

 

I was sure that if I ever got a t4r it would be white. Same with the taco. Didn't end up that way with either of them haha

 

New Hampshire. South westish. It's not a secret, public event by ENH. Highly recommend going if you can.

Meeting spot is in Newport, NH. If you haven't signed up for enh yet that's all you need to do. Event is free, great trails and good group. It's mainly Jeeps, but a decent amount of Toyota too.


https://forums.exploringnh.com/show...Western-NH-Fall-Crawl-Oct-25th-26th-27th-2019

 

Meh. A good plug-patch is good for the life of the tire anyway, so now it's one less thing to worry about.

 

Super easy to plug a tire yourself.

Leave the screw in, get a plug kit from vatozone for like $10. First you ream out the hole a little with the reaming tool, then add some rubber cement and shove the plug in with the plug inserter widget. Then you just pull the plug inserter widget out, trim excess plug and go on your way.

 

Hopefully that’s the same for people to. That’s pretty much the procedure I just had done!

 

Hopefully they trimmed the excess from the plug end...

 

Ran it with my 1st gen. As far as skid go, i am running the RCI steels to the Tcase