Lift help on my 3rd gen

Alright ladies and gents, im looking at a budget boost lift. I know theres info on this out there but i CANNOT find it. I just went and picked up the pro comp 65205k 3 in nitro leveling kit. Anyone have this setup? Im going to pick up a set of discover stt pro 285/75/16s tomorrow and i want to make sure this is going to work. Any help and or pictures would be greatly appreciated.

 

You may want to do a little reading about lifting your truck. When these trucks are lifted 3" or more often times they are difficult to align (which is resolved with aftermarket UCA's) and tire rub can be an issue. Knowledge is power!

What you need to know about lifting a 2016 Tacoma - Presented by Toytec Lifts

 

I'm confused, you're looking for a lift, but have already purchased one?

 

My apologies i meant im looking at lifts and i just picked one up. But truth be told im not sure im done looking yet haha

 

Ok fair, definitely would do a lot of research first (hopefully you can return the lift if you don'd end up wanting that one).

Buy once cry once

 

Installed mine this week. Same procomp kit. 31 x 10.5 wild peaks

 

285/75/16 no workie workie with this lift on STOCK wheels. 265/75/16 will work.

 

https://www.tacomaworld.com/threads/post-up-your-aftermarket-wheels.461851/page-34

 

NICE! Any rubbing or trimming?

 

I like the idea. I think ill just drop my tire size a bit. Help with mpg too

 

Agreed, cmc will be required or you will rub when backing up or going through any kinda dip.

 

No sir, no rubs and no surgery.
I bought the truck about 9 weeks ago. Found this forum, like most ppl have from searching. Did some reading here and came to the conclusion that most of what I have been thinking about has already been hashed out. Thinking about wheels on your truck also ? There is a thread 40 pages long on just 3rd gen wheels with bigger tires on all color trucks. The info is here, just takes some time to read and find it.

 

I plan on keeping my wheels stock. Installing kit now and probably going with a 31.5x10.5 should keep me off the ucas and prevent the need for cuts. Hoping it all goes smooth. Have any tough spots on kit install?

 

2" RC leveling spacers with 265/75/16. No rubs.

 

Nice rig man! Thanks for sharing!

 

surpreme Suspensions 2.5 front 1.5 rear lift. Diff drop , carrier bearing drop , tapered lift rear blocks. No problems at all 12k on lift. Light trails and camping. Have fun

 

2" front,1" rear eBay $95