What is this hose?

Whats the name of this hose disconnected? Know where to find it?

Its cracked and want to buy a new one. Cant find this hose anywhere online

5VZFE 6 cyl, 3.4 L, 2000

 

That is a 8mm vacuum hose and can be replaced with thick wall silicone vac hose. It wouldn't hurt to replace them all judging by the pic.

 

Thanks! But does it need to be an angled hose? A guy at the auto parts said I should get the same angled hose from toyota

 

Because most parts shops don't carry THICK walled silicone hose which can handle tight turns without restricted flow. You will find silicone hose kits online in black red and blue.

 

I got a shop kit from siliconeintakes.com and was very pleased with it.

 

Don't use the silicone kit hose to replace the brake booster vac hose.

 

I believe it is the vacuum switching valve line. I think it is 23827A... the Toyota parts guy knows how to decipher it.

 

The important thing is just don`t kink the hose long radius bends for non molded hoses .

Some times you just can`t wait to get the correct hose.

 

That particular hose is not for the brake booster. It’s just for the emissions canister

 

ding ding ding that is correct but OP cant find it online so Silicone was suggested as feasible alternative with booster line warning

 

I replaced that line with silicone from the kit. I have had some problems since replacing the line, too. Is the silicone hose too flimsy?

 

The silicone hose wall is too thin and flexible to use for brake booster vacuum hose replacement, it's good for the other places, just not the brake booster. It will collapse under vacuum and cause brake fade or loss of braking.

 

Cut it off see what happens. That’ll tell you what it is

 

And clean off those damn pine needles!