Eibach pro lift kit

Finally got mine installed. I’m happy with the outcome. Parked facing downhill so it’s not the best pic

 

Good deal. Thank you! Did you use the 1/4” spacer on the drivers side? I have one of those too, but not sure if that’ll cause me to need the bracket or not.

 

Dang....man your Rig is looking good.... look like you did UCAs too.... i was thinking of getting a set of red TRD sport bed decals.

 

Looks great!
Did you install the sway bar relocation bracket?
Also, what’s your set up? Springs on lowest clip and 3 leaf add a leaf?

 

Thanks! Yea went with some JBA ucas. A lot of people take the bed decals off but I like all the subtle red

 

Both prior and current setup I used 1/4” spacer on driver side.

 

Nope it’s on the lowest setting and left the sway bar relocation bracket out. My installer tried and said it was clunking. I just removed my sway bar while Eibach figures their shit out. Kinda getting frustrated, seems like they rather hand out patches then get something that I consider serious dealt with.

edit: add on - and I went with a headstrong progressive 3 leaf aal for the rear, overload out.

 

Haha "hit or miss" no pun intended right?

 

@CementMixr how's the ride without the sway bar? I haven't had time to take mine off yet.
Also I'm wondering if the 1/4 inch spacer is causing the sway bar to be pushed down making it clunk only on the driver's side...the plot thickens. I just got some JBA ucas too! Have you got an alignment yet?

 

Now I understand how this happens...

 

haven’t noticed much of a difference without the sway bar. Not sure what the issue is... but I’m really hoping the professionals come up with a resolution. And yes got my alignment done with install

 

I decided to just install my kit myself. I just got the front done and there doesn’t appear to be any issue with the sway bar. Looks like there is plenty of room.

 

Looks Great!

 

Did you install the sway bar relocation kit?
Did you install a 1/4 inch spacer for Taco lean?
How much space between your sway bar and the cross member bracket (radiator support bracket) on the driver's side?

 

I did end up putting it in and I did use a 1/4” spacer. I’ll have to look into the spacing.

Edit: the sway bar doesn’t even remotely come close to anything related to the radiator.

 

Looks good, your front looks high for the first setting compared to a lot of these pics. Interesting how these trucks vary.

 

Nice looking trucks......i love the way the eibach kits ride....how much lift did you get

 

Now your wheels and tire look small. Time for an upgrade!

 

I haven't had a chance to drive it around much, I'm sure it will settle this coming week when I drive the patched pot hole road to work.

I do need it to come down some prelim measurements put the front at 24 hub to fender
But that was right after install. Maybe tomorrow I'll take her for a drive down pot hole paradise, I don't like the bro lean even if it is just a 1/2"

 

I didn't want to post #s until I had a chance to let her settle.

I have some 4 runner rims I got for a steel, but I'm stuck tire choice limbo right now.
I'll run her this way for a while just incase anything pops up, that way I know its not the tires.
I already played chase the vibe game with my seccond gen.