Reservoir bracket rubbing uca

Hello, I notice that my reservoir bracket is rubbing on uca and the bushing. Any solution here?

 

You can rotate the clamp around to the front or the other side so it won't rub it. For the actual mount are you able to loose and move it over? I would think you can adjust it. Notice anything bad?

 

Can't you just rotate the Jubilee clamp around 180 degrees?

 

I’ve thought about rotating clamp so that can be resolved. For the actual bracket, I only have one tight screw and the other for some reason can’t tighten all the way. I believe it’s stripped. Not sure how that happened..

 

damn you install or a shop? I would have to go look at mine and see. Can have my buddy check. his 3rd gen. If its not rubbing or hitting anything after the clamp its prob fine.

 

Did the install myself. I also got alignment and casters done but didn’t notice until today. Not sure how long it’s been rubbing. Maybe the bracket came loose. From just the 1 screw. I left the other screw half way in. Not sure why it doesn’t go all in.

 

And on top of that, my airbag and seatbelt light keeps staying on. Oh! and I’m having battery issues with my new battery. AAA informed that a cell died and my battery was too small. What’s next?

 

Loosen the hose clamp and spin it away or flip it over so it’s on the other side of the resi.

 

see if you can get it warrantied on the battery. did you do any other work electrical wise? If you have a wire loose you will get all sorts of stuff. ie: the hazard panel if loose will give you an airback error and a few others

 

I’ll definitely look into that. I’ll keep you posted. Thanks for your help