TRD Pro & TX Baja OFFICIAL Thread...

No, I mean like Deavers or Dakars or All-Pro's. 3" (in quotey fingers) lift springs.

 

I’m on a full leaf pack(Icon RXT on Option 1) and my ass is twerking

 

Stinkbuggin' it.

 

Right on. I'm on all-pro's. Just wanted to know who was on what so I can know how to reference my numbers

 

The rear is raised about 1.875” give or take, then the 3rd Gen Pro Fox’s dropped the fronts about 1” lower than stock Baja/Pro some-fuckin-how

 

Please, post yours and this’ll be a learning thread since we’re the guinea pigs lol

 

I gotcha, the discrepancy is in the front. I wonder if it's a softer spring?

 

I'll measure as soon as I get home. And although I've sworn to squash the spending, I could really use some UCA's to properly complete my setup. I'll be keeping an eye out for yours.

 

I’m definitely gonna use my 1/2” top plates when I put on the fox’s

 

That’s what I haven’t researched yet. I know the Baja’s are 650, but the Pro’s(2nd Gen) are 600. @Bubbles has a Pro and his measurements concluded it’s 1” higher than my 3rd Gen Pro Fox’s

 

I’ve got the SPC’s available, BNIB. Selling for what I paid: $550 shipped

 

I would think that as far as height was concerned you could lump the 2nd gens together (Pro and Baja). Your're right about the 650 vs. 600. But I would think that the height was the same, the only difference being the compression rate. (Unless of course we're talking about 2nd gens with plate bumpers and full armor and shit, then the Baja's compression rate would handle that better and settle less. But I don't think we're talking about those kind of trucks.) So it's really a question of why is the 3rd gen setup 1" lower than the 2nd gen?

 

Yeah man you’re exactly right. That’s what I was thinking and it boggles me. At the very least, the 3rd Gen setup would be the same height as the 2nd Gen yet I was expecting a 1” height increase. I actually wouldn’t mind going back to a stock leaf pack but just didn’t like how quickly it sagged. Then again I don’t throw much shit in the bed like I used to. Another plus is less takeoff vibes lol. ST(Short Travel) stock life FTW

 

Lmk man forreal. It’s in the original box ready to go. I ended up sticking with my Icon Tubular Delta Joint

 

On that thread you posted @Island Cruiser i thought I saw the Fox’s are #650

 

Sweet man, I missed that. So maybe it’s a shorter coil?

 

FTFY

 

I copied this from that thread

This is the spring and part number. I have these on a set of pro fox shocks, 700 lbs spring ratemade by eibach, it hardly gave any lift maybe 1/4 over the factory pro springs which are 650 lbs

 

So after going back and looking at our measurements.....the Fox’s aren’t 1” lower than the Bilstein Baja/Pros.

@Island Cruiser your at 21.5 and 21.25 stock Fox’s. I’m at 22.5 and 22.25 Baja/pro suspension with the 1” top plates