What Have You Done To Your 3rd Gen Today?

Sweet setup!

 

that’s a nice truck. Welcome!

Just drove a Trd Pro yesterday and was very impressed with the stock suspension. Firmer that the stock 4runner and Taco Trd off road, but much more planted and soaked up the bumps better.

Was really impressed with it. Great purchase!

 

I found that to be a huge difference, the Pro stock suspension. I drove this same road in a 2019 4Runner just this past June. I might be wrong but I think the TRD Pro had a shorter turning ratio than the 4Runner as I didn't remember managing some of the switchbacks yesterday as easy as I did in the Taco. I am really happy with the purchase. Mine had plenty of chances to soak up the bumps better yesterday.

 

Got my MESO Customs Ultimate Turn Signals ordered this am. Been waiting for the release of the new ones for awhile.

 

Mt Washington is nothing. That’s Mt Evans in Colorado. The highest road in North America. SUPER SKETCHY road.

 

I rolled the 1k mile mark last night!!! Woohoo!!! Now time to drive like my normal Ahole self and kill my fuel mileage.

 

Thanx for this. Just purchased this myself. Never thought to look for truck specific instructions.

 

I found it over here

 

Installed Cali Raised light bar last night. Was pretty straight forward but not as easy as the video.
Still deciding what to do for switching.

 

Mt. Washington is hardly nothing?Some of the worst weather and highest (231 MPH) wind speeds in the U.S. have been recorded there. Don't be fooled by the difference in elevation.

Been up both and both can get nasty in a heartbeat! Would I go up either one without cold and wet weather gear? Take the "e" out of elephant and the "f" out of way!

The size of the chains holding down the observatatoy / visitor center on Mt. Washington is mind boggling and will blow you away.

Cog Railway up Mt. Washington is a trip! A little pricey but put it on the list if going there.

 

Same one I put on my truck.

Yes it is and you use the same torx screws that are already in the header rail.

 

props to @CBoy808 for the decals






Also made some snorkel thingy

 

cool side shot of the new lights

 

That’s another level, son!

 

finally a glimpse into what's going on. hardshell taco is now softshell taco.

 

I grew up in Boston and hiked the White Mountains for many years. I know what Mt Washington is like and I’ve hiked it

Hiked Mt Washington for years and the White Mountains. I’m fully aware of the weather and dangers in that area. I’ve summited in the winter as well. Yes , I’m Mr Adventure. My Evans road is far far worse than driving up Washington, I promise. Remember, I’m just talking about the road. Mt Evans I think is a far safer climb than Mt Washington, especially in the winter. You can go from fine and sunny to dead and frozen on Mt Washington real fast.

 

Got everything tested for my second fuse box, including test fitting the components (Aux-Battery/Fuse-Box/Aux-Charger/ham) in the compartment. I'm fabricating a bracket to hold the fuse box and battery (not in view) and to provide attachments for cable management to clean up the route of the remaining stray cables. It all works just need to make it pretty.

 

Did the Mt Evans drive last summer on the recommendation of a friend.... concur with the “super sketchy road” description.
When I returned, I asked my friend wth? you could have tipped me off about the road! He replied, “well. yeah, it does get path like” This guy was watching the parade of cars.

 

That is sweet!!!! I loved my 92 Turbo. I'll have to see if I can dig up some pics. I really miss that car sometimes.