Tires rubbing on fox resi's!

I installed my fox coilovers this weekend and today I noticed while backing up my tires rub on my resi's while backing up! damnit!!!!
And I only have the stock rugged trails..

I have a set of spidertrax sitting in the closet...I guess ill be putting those on now.

 

spacers????

 

what?

 

Where are they mounted? Pics? Might have to remount them to clear larger tires... even with spacers

 

Read more? He said he has a set sitting in his closet.....

 

In the normal spot. im running stock tires. I had 285's on the last one and they didnt rub.

 

I think I figured out my problem. I may have mounted the resi brackets the wrong way. the front should point down and the back should be up. then the tire would clear it when I turn. Im gonna flip them tomorrow.


I didnt even knew it would make a difference. but after looking at my pics from my old truck I guess thats the problem

 

yea, it was bothering me that they were rubbing on these stock ass tires when they didnt rub at all on my 285's!

 

your old wheels had different backspacing too.

 

your right. but where these are rubbing on the resi is close enough to the very outer edge that if i swap the mounts around it will be able to clear. 99% sure


If murphy is reading this........well I just hope he isnt.

 

I swapped them around and no more rubbing.

but I have been hearing some weird squeaking coming from the suspension. I found out the sway bar is rubbing on the driver side CO now.... if its not one thing its another....damnit

I ordered the relocation brackets for the sway bar to correct the issue

 

Remove swaybar FTW!!!!

 

I thought about it, I did on my last truck....but 90% of my driving is on the hwy so Im gonna keep it on. I should have the relocation brackets in a few days and I should be good to go