Jumpers LED's

I need some LED headlights and reverse lights, is that something you can help with?

 

Yes sir. Got you covered . Pm inbound

 

I have a 07 tacoma with the fog lights in the bumper (assuming they are DTRL's, they are not yellow). Does this make it easier to avoid the hyperflashing plague of led's? I'd ideally like to swap every bulb over to a LED if the price isn't insanely expensive. Failing that, Do you have the led's for the turn indicators on the headlights? The ones closest to the fender if possible. They are a pain to reach without dismantling the whole front end and i'd like to nip that issue in the bud while it's apart getting the engine repaired. Thanks!

 

Pm incoming

 

hey @csjumper2003

I need DRL white/amber switchback for a 2010-2013 4Runner for my 2014+ housing. Should be a 7443NA compatible. Do you have anything that will work with that setup?

I'd also like an amber set for the rear turns, 7443NA

 

Got you covered. Pm coming your way

 

2014 Tacoma trd sport, looking to get (in white), dome light, 2x map light, 2x vanity light, 1x shifter LED for auto. What would the damage be for this?

 

no problem.

 

Do you have a pair of bright amber LED's the replace the DTRL's/ front turn signals (Canadian truck) that won't hyperblink? Won't get too hot? and are plug and play (IE don't need resistors soldered in)

Too much to ask?
2015 Tacoma

 

I have leds yes. I have resisters that don’t need soldering but I do not have an led that won’t hyperflash without resisters. Pm me if interested.

 

@CttAznRanger First post, hes got the good good leds, Im going to pick up a full set for the truck when I finally get my act together.

 

Just give me a holler when you want to get them installed.

 

Pmd

 

Can you shoot me the deets on the following?:

Interior Kit (2 maps - 1 Dome) 2nd Gen, White
License Plate 400 Lumen
Reverse 700 Lumen

Thanks!

 

No problem. Pm sent

 

Hey! New here, but I would very much like a quote on your white to amber DRL's please. Also, are they plug and play? Will I need to wire resistors? And the last question I have that's really important is I checked my bulbs and its not the 3157 bulb that every single auto site is telling me it is. It's some sort of 3 prong bulb. Will I need to do any soldering or is it plug and play with the 3 prong adapter? Thanks!

 

Got you covered. Pm incoming to answer all your questions

 

Hey CS,
I have a 2011 TRDS DCSB. Can you send me some pricing for 200 and 400 amber parking lights, amber fogs, and headlights? Thanks!

 

Pm coming your way

 

LEDS swapped in. Looks great Too bad my swing out in the rear gets in the way of my reverse lights. they are bright but coverage is mixed. FYI for anyone with swingouts since the backup light in the the lower part of the taillight and you have not hooked up your lights in the bumper to the reverse.