What Have You Done To Your 2nd Gen Tacoma Today?

I was changing my rear diff oil and found something on the drain plug magnet i didn't want to see... Metal.
At first i thought it was from an oil seal, then i checked to see if my locker still worked. It did NOT lock up when it normally does. so the last time offroading i was too hard on stuff.

Does anyone know about the factory e-locker? How much will it cost to fix/replace?

The abs light came on with the locker but the diff light that shows its locked only flashes now and i heard another noise back there when i tried turning it on. Im sure my drainplug has more passangers now...

 

Just as secure as the stock one, the antenna flexes.

 

Fuck It.
Just bought it.
I noticed it was on sale with 10% off

Sometimes ya just got to charge it to The GAME.

 

I was referring to the redline hood struts

 

Ha Ha, The hood struts seem very solid.

 

Installed my ditch lights and brackets. Waiting on the harness to arrive so I can finish them up.

 

Nice, I'm gonna put some on a bed rack/basket that I just got all tacked together, it hinges up to access the bed

 

I just resoldered my existing resistors when I fixed mine a few years ago. A prong on both resistors were disconnected. Still working good.

 

Better than too much plasti dip

 

Had to improvise. Picked up some 3” stainless 90degree brackets from Ace. Required a little work on the drill press, but nothing difficult. I would recommend a 3.5” bracket if you can find em.

 

Nice ..have something similiar, added grommets for vibration rubbing etc...

$8 125pc 18 Sizes Rubber Grommet Kit - Includes Grommets for Wiring, Hole Plugs, and Automotive Firewall Grommet (1/4' 5/16' 1/2' 7/32' 3/8' 9/16' 5/16' 5/8' 3/4' 7/8' 15/16' 21/32' 1')

https://www.amazon.com/Ram-Pro-Asso...1572217656&sprefix=rubber+grom,aps,169&sr=8-1

 

Put my tubes on my bumper today

 

Nicely done! Paint the chrome bumper or just replace it with a white one? I need to swap mine as well.

 

Big Thanks to Glorifiedwelder! Just waiting on the front custom spec coilovers then the fab work can begin !

 

Good catch! The picture is oriented correctly as you can read the screwdriver name!

 

Thank you =] It was Bumpershellz! So convenient, I was able to install by myself, which is always nice.

 

Oh yeah, did another thing #hardshelltaco

 

What rear bumper is that? I want more clearance on the rear but need to keep the hitch. That looks like a great solution.

 

Lemme guess, Frank?

 

Hacked together some stuff to mount the MaxTrax to the DIY rack on the topper. Hopefully I measured correctly and will be able to stack 4 when the day comes.