What Have You Done To Your 3rd Gen Today?

Lol no, I should have been more specific. The DU on my tailgate is a chrome (duck head) Ducks Unlimited logo as shown on lower left corner.

 

Ah Ha! Got it.

Nice grill too!

 

Installed my N2 remote starter today!

Also had some left over sound deadening from my speaker upgrade so threw it back here.

 

Finished my second auxiliary fuse/relay box today. Same type I used under the hood. Four fuses and two relays gives room for expansion. Under the bracket is my auxiliary battery for my ham and an always on power port. This also drives my siren/flashers and the scene lights I installed on the roof rack. Today I completed the bracket and cable management.

 

What grill guard is that? Pretty sleek.

 

Has anyone painted this metal piece on the shift knob? Can it be removed easily or should I just mask of the leather?

 

It pops off from the inside. Meso has a video on his ECT shift button installation on how to remove the leather piece. mine is painted MGM and others have painted theirs.

 

Finally got the new wheels and tires installed! 17x9 SCS F5 wheels in matte dark bronze with -38 offset. Wrapped in 285x75x17 BFG KO2s.

 

Thank you.

 

AJT Design vent rings completed.

https://youtu.be/oenSBwVwDp8

 

Never said 100% all the time. It is on all the time the truck engine is running. Is that clearer?

 

I wonder if AJT will come up with a v2 that addresses the ring offset?

 

Keep us updated tomorrow.

 

this is V2. i demo what needs to be done.

 

Nice!! How much and what lift? I was wondering how well 285x75x17 BFG KO2s fit.

 

My bumper is still about 8-10 weeks out. Love the look of these.

 

As Rob said, they already came out with a v2. @AJT DESIGN was pretty quick to address the issue of the chrome showing. If you got the v1 then reach out to them.

 

Started reading about this. Here’s a definition of what the acis does if interested. All it does it open and close a butterfly valve to shorten/lengthen the intake runner.
https://en.m.wikipedia.org/wiki/Acoustic_Control_Induction_System. Kinda makes sense there isn’t any hesitation on take off. I’m assuming the intake runner is in the shorten position?? Just my thoughts.

 

Had my first Fluid Film experience this weekend..not too bad. Sure doesn't have a great smell. Used 9 and a half cans and thoroughly coated everything metal under that truck. Pulled the plugs on the rocker panels and doors and gave them a generous inner coating as well as lowering the spare and just going to town. The hard part will be not rinsing the salt off the undercarriage all winter and trusting the product. Also thinking I will upgrade to the gallon size and compressor sprayer next year. Let me know if anyone has any questions.