1st Gen Toyota Part Numbers & Prices

in case you did not have this one listed already

3.4 cap,ventilation part # 1223562010 .... MSRP $13.65

 

I appreciate all the effort people are putting into this thread.

Though I chuckle when I get the following error when attempting to access Camelback's site.

They sure don't like people who work behind a common "hide NAT" as part of their computer's VPN for security. LOL.

 

What’s the difference in between this 3 thermostat
A13. Thermostat 82°C/180°F Stock90916-03075$19.31

A13. Thermostat 76°C/170°F 90916-03107 $29.42

A14. TRD Thermostat 71°C/160°F00602-17621-001 16340-SP010 $65.00

I’ Not mechanical inclined

 

They open at 3 different temperatures. 180, 170 and 160.

 

Thanks for the helpful info posted here

 

i am needing help in identifying this piece i found missing in the driver wheel well, probably one of any assorted clips or plugs or grommets
and part # if its been found already
not sure when mine disappeared or how, and i am not sure what is behind this area! until i have to take the liners out and get up close and personal with it at some later point

 

90189-06157
Search google with number

 

thanks, do you know if there is supposed to be a grommet it clips into or just one piece?

87c each at camelback OR $13 for 50 of them on Amazon, what is the better deal


https://parts.camelbacktoyota.com/oem-parts/toyota-rocker-panel-molding-grommet-9018906157

 

"Fender Liner (and) Mud Guard (and Fender Trim/Flare) Screw Grommets for Toyota 90189-06157 USA Seller" at eBay 10 for $6.57, free shipping. Search eBay with:
Fender Liner Mud Guard Screw Grommets For Toyota 90189-06157 USA Seller
Square hole in fender sheet metal accepts the press-in grommet.Holds the liner to the sheet metal.

Grommet accepts "Toyota 90159-60393 Screw, with washer tapp". Screw secures the following to sheet metal in fender:
-Fender Liner
-Mud Guard (OEM or aftermarket)
-Fender Trim/Flare
Grommet fastens liner to fender. Screw can be fastened directly into grommet over liner OR holding fender trim/flare to liner and fender OR holding holding mudguard to liner and fender OR holding mudguard AND fender trim/flare to liner and fender.

When pricing any part at any Dealer, check the shipping cost, then head directly to eBay!

My grommet at eBay from eBay vendor NorthStarDistributingUSA. Likely have the screws also.Direct site is. Northstarautosupply.com

 

Better yet, go directly to: https://northstarautosupply.com/products/set-of-15-grommets-90189-06157?_pos=5&_sid=1cd4c642f&_ss=r

 

Also, when you search for the SCREW part number, Toyota 90159-60393 you may find a "bolt", with a drawing that looks nothing like the screw. Be assured, that part number is a screw, not a bolt.
The GROMMET is really only necessary to fasten the liner to the metal fender, but the screw allows you to fasten mud flaps and/or fender trim to the grommet/fender.

 

i could not find the rear diff vent breather part on this list or did i overlook it

 

Don't think that was is in the main list. I have updated it.

 

We know we all want to get the best price when we purchase parts for our Tacos.When purchasing on-line, be certain to include "Shipping and Handling" charges in your comparisons.
For example: 10 small screws @ 0.87 each = $8.70 "Freight": $18.56 TOTAL $25.92 [$2.59 each]
The screws, 5 packages of 2 screws each:

The Packaging-A classic example of wasteful over-packaging. Sent overnight FedEx. Customer is given no other shipping options.To their credit they re-used a carton from another Toyota part.

The Invoice:

 

2004-
should be the same, used in 2003, 2002 so far
$10 at local dealer after requesting price match

 

as far as i know Camelback has a $20 flat rate unless its oversized, they used to have free shipping over $100 i think awhile ago but was told they discontinued it and slashed prices some to make up for it

maybe i should order all new replacements of these screws (how many would i need? i have not yet counted them) because i don't know if they are going to snap when i have to take all the liners off for a pending paint refresh, scratch removal and undercoating at Ming one of these months when its ready to go

 

https://toyotaparts.mcgeorgetoyota.com

 

Screws simply unscrew so no chance they will snap off. Grommets function as nuts for the screws. With screw inserted, springy clips will NOT retract.

 

do you have a part# for this wheel opening molding clip thingbob that broke on my cleaning these out
looks like they just snap on in there

 

These are not familiar to me. Best to identify the year and model Tacoma; See if the part number for the wheel molding/flare is on that item, then search a parts list/diagram for that year and model, for that part number. The fastener part number may be adjacent to the part number you do have, on the parts list and/or the diagram.
Good Luck!