What LED reverse lights are you using?

So many different options and reviews for LED lights I'm just curious what you guys are using for reverse light LEDs and what you think of em? Specifically looking for some for a 3rd gen

 

I have a set of Rigid Ignite flood and diffused lights for reverse. Got a good deal on them. Should have only used 1 set. They are super bright for a small light. Was really surprised.

 

I have bulbs from these guys and they are good for me
http://deautokey.com/

 

https://mesocustoms.com/collections/all/products/stage-1-3rd-gen-tacoma

worth it...

 

I put one Baja Design S2 flush mount into my bumper;



I put it on it's own circuit but you could easily wire it into the reverse lights.

 

I have a pair of Baja designs flush mount S2 PRO’s scene lights in my rear bumper. Tapped into the reverse lights but also connected to my spod so I can turn them on whenever. Really really bright light that makes backing up in pitch black darkness much easier. I also have one on either side of my roof rack for side lights

 

Rigid flush mount. Wired to reverse lights. Comes in handy more times than I have counted.

 

My camera has a reverse light built into it that lights up behind me pretty good

 

V6 Tritons via @MESO CUSTOMS Stage 2’s! Awesome light setup, that really should be OEM with these trucks.

 

I installed the Auxito ones from Amazon. I couldn’t see backing down the driveway at night either mirrors or backup camera and these fixed that. Plug/play/done.

$35 AUXITO Error Free 912 921 LED Bulb Reverse Lights Backup Lights 4000 Lumens/Pair Extremely Bright CSP 9-SMD 906 W16W T15 LED Bulbs Plug and Play for Backup Reverse Lights, 6500K White (Pack of 2)

https://www.amazon.com/AUXITO-Lumen...to+error+free&qid=1565924142&s=gateway&sr=8-3

 

eBay flush mounts

 

Thanks bagleboy. These auxitos are bright!

 

I wanted to buy these, but I've been told they tend to go out if you leave it in reverse for too long. I.E backing out of a trail

 

LOVE this. What model? Thank you. Do you have a write up? I’ve been wanting to do this but semi nervous to cut into my 8 month old truck ha

edit* I see what model you used.

 

I picked the combo yellow lens for both distance and close;
https://www.bajadesigns.com/products/S2-Sport-LED-Driving-Combo-Amber-Flush-Mount.asp

Someone did an install how to for the Rigids in that spot. I poked around up there and found where I wanted it. Template came with the light, drilled the corners and then used a dremel with a cutting bit to take out the rest. It's easy, protected, and very bright.

I chose to wire mine on it's own switch - and not tied into the reverse lights. I figured that using it for hooking up the trailer in the dark, and getting out of the ski parking lot in the dark made more sense to keep it on. I also was wiring in the BD interior light into the bed so routing the harness went in together.

 

I'll test em out for you. It's noon now.

 

Well shit, you might make me spend some money today lol

 

Still on at 1:14. I think they're good. Truck still started.

 

@crashnburn80 I guess I'll have to buy these. We can test them sometime.

 

Any night shots? Looks like rigid igniter, is it diffused, spot or flood? Thanks