1st gen parts

Do you happen to have a transfer case, front driveshaft, 4wd rear drive shaft, and misc interior trim pieces around the shifter.

 

Rear shaft no. I might have slme trim. Have a front shaft and 2 cases off 4cyl

 

what city you from?

 

and do you have the gas cap lock

 

1995-2000 has the locking gas door cover. He’s from Berkeley, CA.

 

You trying to do the 4WD swap? Hope you know about the ETCS-I transmission issue on 2003/2004 v6’s. You can’t use any other transmission.

 

how do I get it I'm from California in the 805 area

 

I don’t think he has any, but he can correct me. I’m just a friend of his.

 

Do you have the Front right (passenger side) spindle/Knuckle?

 

I think so. Its add

 

I have the stock front and rear drive shaft out of my 2004 auto 4wd access cab, if ya need em feel free to shoot me a PM

 

got a power steering pressure hose? Return hose? Intermediate shaft no. 2 that attaches to the steering rack?

 

Do you have the transfer case extension housing for the auto?
Thanks

 

Happen to have a rear 02 sensor, b1 s2 behind the cat for a 2003 3.4?

 

Any V6 airboxes? Need one that hasn't been invaded by a deckplate...

 

I don't have the cover for this one. Previous owner did the mod and I never found the plate in the bin of spare parts that came with the truck. Also going to put a snorkel on the truck, so it seems to make more sense to use an airbox that hasn't been deckplated.

I need to pull out the existing airbox to either replace the deckplate with a new one that has a cover, or to replace the airbox entirely. May as well find a stock airbox at that point and save myself a little time.

 

Well thats what im trying to do with a used one, i bought the truck catless and without that sensor, and now the 02 bung is gone and replaced with a straight pipe as well,so even more work....ive got loose wires comin down for that sensor, so im tryin to find a cheap one, thanks for the heads up on the superceded parts though and the 02 sim trick advice.

Do you happen to know if I could pull off an 02 sim without that sensor? Everything i read says one has to plugged in. Im sayin is it possible to run a 12v or a 5v reference to the other wires too, to simulate a sensor actually being there, and also to simulate that its good...thats a lot of simulatin' haha

 

I'm new here (first post), and trying to locate the alarm part for a 2003 Tacoma DBL TRD -- the so-called "free alarm" part # 08586-04820. I have keyless entry already, just not the alarm part. Do you happen to have it? Thanks!

 

No horns just this

 

This one?