209 TACOS - B/S and shenanigans

I was thinking about that one but the drifter goes past the B pillar so that one won't work. I'll end up trying to do something similar to the prinsu by cutting some side rails and using the 8020 crossbars. I could've cut my prinsu but decided it made more sense to sell it and DIY something less expensive from the money made.

 

Or have Jerry make you something. Atleast, that’s what I’m having Jerry do for me. I need to get my recovery gear out of the bed.

 

Hey... So... Who wants to loan me a couple bucks?

 

But does the A/C blow cold?

 

Actually, It probably has an A/C blower to a hose that connects to the helmet.

Otherwise it's just controlled by how hard you press the skinny pedal.

 

which is ironically also how the heater is controlled

 

got my enlistment bonus from the national guard. sadly no truck parts are being bought with it...yet.. i need to get the ford focus transfered/tagged an then get the stalling/idle drop issue figured out (drives fine until im in gear and on the brake at a stop, then it starts to stumble and almost stall) if any of you can take a look at it, or know a decent priced shop around the merced/turlock area, let me know

 

Mind if I ask what you're having him make?

Originally, I was thinking about drawing out some side plates and seeing if jerry could cut + bend them for me but was going to wait till I could take measurements and do a cardboard template to validate the numbers. then use 8020 cross bars to make a rack with some sort of storage container up top.

Other thought was some sort of simple angled box with doors on either side and just shove stuff in there. I'll figure out organization later but at least that recovery and other misc stuff is out of the bed and more easily accessible.

 

Pm’ed

 

I'm headed to LBC this weekend for a cruise and when we get back to land I'm planning to take the truck for it's first trail at Cleghorn Ridge 2N47. Anyone been there? I'm totally stock and without rock sliders so I'm keeping it away from a lot of trails until it's protected a bit.

 

Never been there but here is a video

https://www.youtube.com/watch?v=JlOEdDTczmA

 

just saw your post on ig. damn. yeah weird since that was mine from my 2014 dcsb.

 

Anybody want/need a stock exhaust from a 2014 DCSB? Cut to dump just after rear axle
$free.99 located in merced

 

Me gusta



I did something today.

 

Looks good n stout.

 

Just so we're clear... it wasn't the skid plate that I did today.



And yes... I just quoted myself

 

Well damn.. wtf was it? Hahah

 

My bad. The only memory I have of the front of your truck is ringing my bell on that hoop.
Edit to add: Yeah baby. Now I see it. Looking good!