What Have You Done To Your 2nd Gen Tacoma Today?

just now pulled off the cowl cover and sucked out some remaining needles and leaves. there werent a lot left so hopefully next time i change the cabin filter it will be in better shape

 

thats the exact tire i want to get when my current ones wear. i assume the spare fit without any problem?

 

you're correct brother...

 

I agree - nice mod to do on a weekend. Go for it! The sill protectors are the way to go....

 

I've been wanting to see the pro grill on a black truck! Thanks for posting. Did you go with the real TRD pro grill or a knock off?

 

No problem. It's the CaliRaised version. I'm happy with it! Looks good for nearly half the price and good quality.

 

This is a pretty F’in sweet idea! Is this Like a truck cap but you used a rack?

 

I don't have pics but when I cleaned my cowl out I screwed some wire mesh onto the HVAC intake tube, no more worry about large objects finding their way down there.

 

Man that’s a great idea. I’ll do that next time I have the cowl off

 

Got my steering wheel emblem wrapped in carbon to match the rest, got my hood scoop wrapped in Avery Satin Black, still not too sure If i really like it or not, and got my new alien gear shape shift holster mounted.

 

Slowly getting the build done... Just need to finish the front then chop the fenders and re-gear it.

 

Bed mods part 3,000.

Total Chaos bed braces



RIP Yeti bottle opener:


Dinner break:



And done. On to the next project.



Take one sheet of Kydex, cut and sand


Fit and sand some more





Stick this guy in it



Fitted and bonded in (3M weatherstrip adhesive)



Pull 14/2 stranded from battery, seal hole and rear drain holes in compartment.



Connect and test




Notch cover for cable pass through.
Done! Now I have a 12v circuit for my fridge



Add two more in cab USB circuits for wifi hot spot and Garman sat locator thingie



My assistants helping with the next mod.... Packing all our gear in the truck.



Doing truck stuff! Truck's pavement princess/instagram fodder days are over.



Did offroad stuff, had fun, got dirty.



Family bath day...

Hopefully not pic overdose...

 

It's just a rack that I made from scratch, its something I've been wanting to make for awhile. Would love to sell a few of them.

 

Nice collection and garage you got there!

 

So here it is all done, I think it turned out great.
Hope I can sell a few.

 

Uh, just checked mine. I think it is a bit more dirty...

 

Did you just dump your lawn mower bag on the floorboard and toss the filter in for the hell of it?

 

Honestly! I will say, the stick was my excavation tool, but everything else was above the filter.

 

Have you owned a first gen? The bumper has natural spots for beers on either side of the bumper when the tailgate's down. The second gen fails big time here. But, a first gen fail is the spring-loaded-arm cupholder thing. Taking the good with the bad, I made a sheet metal bracket that fit a Chevy Colorado cupholder (the one in the pic) and installed it in my old truck in place of the stock one. Well, now that I'm getting ready to sell that one, and returning it somewhat to stock, I thought I'd rig up that Chevy cupholder to make up for the bumper-beer deficiency in the second gen!

I just made another sheet metal bracket, this one longer and with a 90* bend, for the cupholder to mount to, drilled holes in it, attached it to the utility rail using some nuts from my parts drawer that had a shoulder/washer built in (these slide in the rail), and some bolts and lock washer to hold the whole thing together. It's a little wobbly, but for camping and cooking on the tailgate, it'll do nicely.

I don't know if that's the best explanation. I should have taken more pics.

 

Did some green trails at Chocco this weekend!
https://youtu.be/mUGpMtlZJsQ