Colorado Trading Post

Does anybody here have audio installation skills? I'm looking at buying this: https://www.tacomaworld.com/threads/rockville-sub-amp.632289/ .
I know it should be super easy but audio is not my forte and I don't want to screw up my truck.

 

I used to work on Sackett for almost 20years. Good street!

 

Looking forward to hearing from you. Ideally I’d like something that can be modded to work with my tonneau in a way other than cutting holes in the cover itself.

 

Looks pretty simple. Run power/ground to the sub, remove stock headunit, unplug the harness from the back of the head unit and insert the adapter thingy, run RCA and remote turn-on lead from the adapter to the sub, button everything up nice, profit.

 

Didn't happen to be at a bike shop did it?

 

Come on... haha, of course you would be

 

I do! I am in the springs too.

 

I have covercraft rear seat cover for this truck that i am willing to part with because i only have a tacoma lol

 

sold pending funds

 

Buyer, let me know if you would these covercraft rear seat covers. I am tired of them taking up space in my storage.

 

You just giving them away? There is interest on my part but we're not exactly treating it like a luxury vehicle..

 

SOLD Left CV axle for a 2nd gen Tacoma. It started clicking, so I put in a new one. This is a reman unit from CVJ in town. Is it worth anything as a trail spare? $30?

 

@Sub-Zero

 

the left and right axles are the same.

 

Driveshaft Deal! Buy one for $150, and get the other one for free!
The driveshafts will fit any second gen

$90 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)

2005-2015 double cab short bed or access cab Tacoma. They will not fit a regular cab or double cab long bed Tacoma. The flange face to flange face measurement on my truck was 67 1/8".


Single Piece Driveshaft $100 - This is a thin wall tube driveshaft. Do not get it if your truck is geared. My truck had 4:56 gears, and with 33's, the driveshaft would hit critical speed at about 80 and vibrate a lot. You could feel it begin at about 75. With stock gearing, it won't hit critical speed til 85-90mph. Also, this shaft works best with a 1-2 inch lift in the rear. I moved to All-Pro Expos, and angles were about 6 degrees at each end with this shaft after that. Those angles will wear out u-joints quickly. This shaft was freshly rebuilt, and then I found out it was thin wall shaft and would never work with my gearing on the highway. So it's in nice shape.

SOLD - Double Cardan Driveshaft $100 - I had this built by Rocky Mountain Driveline. It doesn't have a lot of miles on it. It never felt perfect in the 40-60 range on my truck, but it was smooth above that, and had no shudder at takeoff. My driveline angles may have been too steep for it to work well, but my truck was at 3-4 inches of lift in the back (I went back to a two piece, which was smooth everywhere, but still had shudder at takeoff.)

I took better pictures:

 

Just posted a few take off parts from my 2019 Pro for those that are interested. Local pick up in Denver only parts.
https://www.tacomaworld.com/threads/2019-trd-pro-garage-sale-denver-co-local-pick-up-only.638348/

 

WHAT!?! They're they same! Good, then twice as many people should want my CV axle, lol. I thought they were probably the same, but it's been so long since I did the work I couldn't remember.

 

Skis gone.

Apex MC-X size 26 $295 obo.

 

Transpack Ballistic Pro boot travel bag. $99 OBO
"Excellent" condition. Almost "Like New"

 

Smith Vantage MIPS helmet size M. $99 OBO.
Smith bag included .

Will include Skullcandy in helmet headphones and Bluetooth connection/controller for device for full asking price.

Condition is 'Excellent'.

https://www.smithoptics.com/us/Root/Men's/Helmets/Snow/Vantage/p/E0067528V5155/sizeVariants