Accumulator Delete Kit - SOLD OUT - No More Kits

The word is he's going to patent it then become a millionaire and the price will come down. So best to wait. (this is in support of the mod)

 

The simple version of this is $20 of parts, + labor, +shipping for around $75.

If you don't like it, buy your own parts and do your end bends. Lol

 

LOL. No. The tooling to flare the lines properly cost about $200 and the proper bender cost about $40, cost and time making 2 different jigs for the 2nd gen Tacomas since there are 2 different versions of the manual transmission, the time and cost to make a jig for the 3rd gens, the use of my time to research all of this to make them the right way, Supplies to make the kits which include Toyota specific fittings, time away from my wife and kids outside of my day job, the fact that the closest post office to me is a 30 minute one-way drive, etc.

That’s why they cost what they do. My spare time is not free.

 

Really? Your website is Trident904.com and not Trident904.org?

who knew? lulz

 

lol. I don’t have a website nor do I want one. I have enough on my plate as is.

It absolutely blows my mind that there are people on here that bitch about $75 when they own a $35k truck.

 

Esp when the kits ship fast and are well assembled, accurate, and you're quick with turnaround. Some people will never be pleased.

 

I won't say what I paid lol...i was customer number 1 lol

 

That was back when I expected to make only a few of these.

 

Are you still at $60 shipped?

 

No. Back to normal pricing.

 

Still worth it. Even if you get the kit and the bends aren't "perfect" (because every truck is a bit different) having them there and not having to worry about it yourself will save you a boatload of time.
and then you know, you'll be part of the ADM club

 

LOL! Am I missing something here or is this just an 8" line and a union or is there more to it? You can buy those parts off the shelf at Autozone for $7 and it isn't like the bends are that complicated. I mean if someone has the skill to remove the accumulator and bleed the system, they should be able to bend line.

I will make a suggestion that will save you time and make things easier on those that are buying this and that is to switch from steel to copper/nickel line. While it is more expensive than steel (marginally if you buy in bulk) it is much easier to bend and you can actually bend it by hand. This makes it easier to install without leaking. It also flares a lot easier as well.

Don't get me wrong, you can charge whatever you want and if people are willing to pay it great. These boards are about sharing information and helping.

 

it is not as simple as buying a line with fittings from Autozone. Those fittings are not sleeved like the OEM fittings and are prone to leakage. I have had no issues with the steel line.

 

Phoenix Systems (2104-B) V-5 Reverse Brake Bleeder, Light Duty One Person, Fits all makes and models

$55 Phoenix Systems (2104-B) V-5 Reverse Brake Bleeder, Light Duty One Person, Fits all makes and models

https://www.amazon.com/dp/B00GRV800S/ref=cm_sw_r_cp_apa_i_.4k0DbG2N3ZJZ

This is the bees knees for bleeding a clutch.

 

Does this make the pedal softer? Only asking because I broke shattered my tib/fib in my left leg and I just got the ok from my doctor for half weight bearing/driving stick and my pedal is pretty hard to push down, I have been looking for ways to make it a little easier on my leg, Thanks in advanced.

 

No

 

Yes

In a word. You can adjust pedal play (somewhat). I think mine is easier to use since doing the adm. The clutch pedals in these trucks do seem to be pretty stiff (compared to my previous rides, 2006 LJ wrangler and 1995 Nissan Pathfinder)

 

I’m not building these kits anymore. I’m done. Thanks to everyone who ordered.

 

Thanks. Mine went in, bled, no leaks and works like a champ. I'm kinda busy and didn't want to buy the stuff separately. I know people gave you some heck.....but this site can be like that, or bipolar - why not pester the folks selling diff breather mod kit, for example. It's best when it's fine for people to have their own ideas, and yet don't harass others for selling a legitimate product. Anyways, again thank you for a useful product!

 

Thanks for doing these kits
I really like my clutch better now