What Have You Done To Your 2nd Gen Tacoma Today?

Getting ready to sell my old '13 Sport. I had an issue with the ALSD system so I brought it into a local mechanic to look at the codes. He found a speed sensor fault and did a quick inspection. Then he asked me to come back to the lift with him and pointed at my front driver's tire:



The wire was cut clean, not torn out by anything. About 3" of wire missing across that gap.
He jokingly asked me if I had any enemies.

I actually do, and they have a court date in January (not involving me). I guess it's a good thing they're stupid and only snipped a speed sensor wire, not the brake line.

Cheap and easy fix, though.

 

2.5 hours later.

 

re: Grindstone
Ex's and their new hookups... at least you don't have to be concerned about facing whomever did it approaching you with violence as they obviously have no spine - or brains.

 

Looks good
What's the level of difficulty

 

Fuuuuck that looks great!

 

Easy, but tedious! Just take your time and be generous on the thread length. I have a lot left over.

Thanks!

Here's where i got it from:
https://www.eastdetailing.com/collections/infiniti/products/copy-of-2012-2017

 

I have een considering looking for a gently used set of 886's for my 5100's as I am now down to about 1 3/4" lift aftr all the weight. On the other hand it rides really well and I have great CV angles. Quite a bit of rake with the Deaver stage 3's in the back

 

More like in-laws and domestic violence, but yeah. He knows I'm armed and I don't play games. At least I have cameras on my house now.

 

My bet is some critter ate it.

 

Catch me on kickstarter in a few months lmao

 

Plausible, but I doubt it given the clean snip at both ends. And that no other part is chewed on.

 

Are you sure hahaha
https://media.giphy.com/media/wTY9Gwbza3FPq/giphy.gif

 

Damn, there goes my hopes and dreams

 

Got my 255/80 17 tires installed yesterday and they rubbed the fender pretty bad. Cut the fender, fender liner, and hammered the pinch weld today. Going to get the cab mount cut later this week or next weekend.

 

Lift or no lift? Wheels will make some diference s well but it doesn't seem to be as apparent with that size. I rubbed a little with them before the lift but not bad pretty much trimming the plastic was all that was needed.

 

Haha yeah hated to be that guy but 3d printing your own is pretty cool man

 

Did some long over due maintance, don’t know if this is common but had two different brands of plugs in it. Also cleaned the throttle body and the mass air sensor. Hopefully it will increase my mpg. It really has fallen off lately.

 

Installed an SOS Concepts rear bumper.

 

Yeah making my own is more fun I guess haha Plus I've been using it as a seat belt chime delete as well.