What have you done to your Tacoma today? 1st Gen Edition

Is that your bumper I seen on CL today? Looked like your rig

 

things really are different down there in Texas, aren’t they?

 

Self invites*

 

It'll be fine, prep your welds well. Chamfer your edges, set the power to D and the wire speed appropriately. I weld everyday with a Lincoln 175 at work and rarely turn it up to max for anything under 3/8. The 140 (which I have at home) should be great for your bumper if it's 3/16 to a 1/4. If it is a 1/4 consider doing a root filet and then a bottom and top filet in that order.

 

How much was all that? I need to do my front rotors and brakes.

 

Actually yes, I have looked at an illuminated blue sign at night. And it's a sign... just like a green sign or any other sign.

But what does your comment have to do with the post you quoted? Blue signs are for NON directional "service" information. Green is for directional information. Because green signifies "to proceed"... you know, like GREEN LIGHTS.

Don't believe me... ok... read the Manual on Uniform Traffic Control Devices... that's the code that determines sign shapes, sizes, and... well, would ya look at that... COLORS.

Evolution of Manual on Uniform Traffic Control Devices... QUOTE:
In 1924, the First National Conference on Street and Highway Safety (NCSHS) improved on earlier efforts and proposed standardizing colors for traffic control devices. Again, many remain in use today. For example, signs with white letters on a red background indicated STOP. White letters on a green background signified proceed. Black letters on a yellow background advised caution. Black and white signs providing information on direction and distance were specified for every intersection and junction. One combination that didn't last was white letters on purple background, indicating an intersection!

LINK: https://mutcd.fhwa.dot.gov/kno-history.htm


So... I will say again... the color green on road signs has...
NOTHING
TO
DO
WITH
SENSITIVITY
OF
EYES
OR
BLUE
BEING
"WORSE"
ON
YOUR
EYES.

PERIOD.

 

MT has some black signs too, forget what they're for.. might be night speed limits for rural roads

 

Yea...my builder upped his prices, even for a simpler design...weird.....but im going to put it up and see if i can regain some funds

 

that is correct.

 

Def not blue. You must be smoking the good stuff!

 

Any ideas on what can cause over heating of the diff??

 

I am stupid. I have read all of the warnings and still did not respond so .......today I am replacing a failed LBJ. also doing the uppers and anything else in there as I inspect. Both sides. AND every 100k miles hereafter.

 

Blue and red, like I don't see what the big deal is
Double barrel 12-gauge bigger than Chris Wallace
Pissed off 'cause Biggie and Pac just missed all this
Watchin' all these cheap imitations get rich off 'em
And get dollars that shoulda been theirs like they switched wallets

This whole light discussion is getting as bad as bed hooks discussion. Blue red purple white black yellow brown put whatever the fuck you like in your rig.

Woof. That sucks, I hope to never have a failure.

 

good luck. i just did this job yesterday, thankfully before a failure. i had to beat the crap out of one of the stems, a result of using the wrong puller. once i got a pitman on there square, it popped off. lots of pressure needed. have a long breaker handy.

 

What are changing to?

 

400 but get the wheelers lines. I had to fab hardlines from tundras

 

@turbodb sells a hardline set. I plan on going wheelers tundra lines and his hard lines eventually, but I don't want my banjo bolt lines to go to waste.

 

Ah got it. I’m only running 32’s with no armor but I think I’m going to redo my brakes. Idk if I want to go oem or this kit:https://shop.advanceautoparts.com/p...N9sYhC14qLRopq4eGCQYqSYG6sz0bUWRoCg_oQAvD_BwE

The tundra brake swap is awesome but more of a headache if you don’t need the stopping power.

 

I disagree. 100% disagree. The stock brakes are not very safe unless the truck is completely empty and has no gas in the tank.

 

Huh? Aside from the people that post on here, the overwhelming majority of 1st gen owners are rocking the stock brakes. If they are unsafe as you say they are, there would be more accidents reported/recalls etc.

I see zero reason for tundra brakes on a truck unless its heavily loaded down, on bigger tires etc.