What Have You Done To Your 2nd Gen Tacoma Today?

WDE!!!

 

Finally got out past my mall, Virginia City NV.

 

That, my friend, is a good looking truck! I miss the ole mountain biking days. I have a Trek 950 that is still in great shape but I don't ride it much anymore. No good trails around here that I'm aware of.

 

looks like you have a few options:
https://www.trailforks.com/region/corydon/?activitytype=1&z=9.0&lat=38.20932&lon=-85.95901

 

I got married in VC.

 

Went home from Cheyenne in it today. I'm liking several things better than my old 2005, which was a beast of a truck.

Toyota fixed a couple of issues with the 05-06 engines. This 2010 just runs like a Rolex. Better than the 05 ever did, no timing cover leak, no head gasket concerns.

 

Good lookin truck! I like the red pinstripes with the grey and the 2 tone wheels

 

Nice town

 

SHIT I knew there was something missing

 

Made a dump run in the morning then put some company stickers on, the plan was to match the wheels but they’re a bit off haha they don’t look as orange in person but I think they look pretty cool anyway. ‍♂️

 

Can you post a picture of your front bumper?

 

Here you go it’s not finished yet still have a couple more supports then the skid to add

 

I was thinking of doing something very similar. I've never seen anyone else do it. Nice work. I like it a lot. Mine will be slightly different, not better - just different. Nice work.

 

Ride on, I hadn’t seen anyone do it on a taco before I did mine either I’ve seen it on a few chevys and fords which gave me the idea. Their is always room for improvement though I like to look at tons of other builds and tweak things a little to how I think they’ll be the best for me. Good luck and remember you can always cut more but it’s not as easy to put it back lol.

 

yup

 

'Twas a busy day for me with my new Taco. First order of business was to install my redneck engineered Homelink. I used a garage door remote I had installed in a similar fashion on my motorcycle, and the metal visor clip was long gone, which made using the remote a hassle. Not anymore:



Next I did the driver's seat lift mod. I didn't snap pictures of it, but I'm sure you've all seen it. 1 inch makes a huge difference. I'm 5'8", and I like a rather high seating position for increased visibility over the hood. Someone locally has a set of the front billet lift blocks on Offer Up, so I may pick those up as well. If I do, I'll likely go up another half inch in the rear. I test German cars for a living, and even the cheap base models have seat height adjusters. I miss them in the Taco.

Next up was a mixed set of cheapo rubber floor mats from Walmart. I am having a hard time deciding which quality set I want, though I'm leaning heavily towards Rugged Ridge, since I had a set in my Grand Cherokee and loved them. I just wanted to get something installed since my carpets are pristine and my truck came with nothing for mats. I'm in Arizona though, so I'm not worried about large quantities of liquid spilling, so these cheapies will get me by until I decide and order:


I guess you can kind of see the seat lift in the pic of the rear floor mats:


Next up, a set of LED reverse lights. My windows are tinted pretty dark, so having some ultra bright reverse lights helps at night. In the photo, the left one is LED, the right one still incandescent. Photos of lights during the day just don't do them justice. Already replaced the headlights with LEDs, and my matching LED fog light bulbs should be here on Tuesday.


I saved the biggest project for last. When I bought my truck, it was fairly obvious that the hood and front bumper had been resprayed, and that they did a shit job of masking off the black bits on the truck before spraying. There was silver paint on the hood scoop insert, every section of the grille, and the grille in the lower valance. I decided that while I was at it, I'd paint the entire hood scoop entrance and insert, as well as the center section of the valance. This was my first time using Plastidip, and based on my experience, it won't be the last. This stuff is awesome lol. I wasn't perfectly happy with where I created the lines for the lower valance, so I'll probably redo at least the end sections of that to move the edges outboard just a bit. Other than that, I'm pretty happy. I was going to peel the Plastidip off of the chrome Toyota emblem on the grille, but I'll be dipping the wheels black before ultimately replacing them with black wheels, so I thought I'd leave it black. I'll likely black out the other badges too. Let me know what you think.






Last but not least, ordered a 3" kit for it, should be here before my 4-day weekend, with any luck. Until my fun budget grows a bit, I'll probably be rockin' 285's on the stock wheels, dipped black, with 1.5" spacers. Should still look far better than it sits now.

Almost forgot! Threw some $4 Harbor Frieght moving blankets on the rear seats so I can take the doggo places without him making a huge mess. Shopping for a dog hammock that has the door protectors too.

 

Did that spare tire on the side of the freeway mod after I caught someone wheel weight. That thing went all the way into my tire. I have huge hands but that thing is 3-4” long

 

no pics but put a 6" lift on..... my hood. Installed my @SpikerEng struts to the hood. piece of cake aside from having to modify my rivet gun to fit inside the fender. amazing fit and finish, money well spent!

 

Dear god ditch those led headlights

 

Finally got my @CaliRaisedLed lightbar on my prinsu and I love the way it makes the truck look. Got my sidelights wired up. I also did a ton of wiring adding in an @Iggy switch panel and a power tray to make the wiring set up not look like a fire waiting to happen. Plus made a ton of custom wire looms to help keep everything clean.