What Have You Done To Your 3rd Gen Today?

Welcome to the herd.
Get ready to spend some serious money is you keep coming back here.

 

You say that now. You’ll get your Ray 10s soon. It’s how it works. Beautiful truck btw. The pro grille really makes a difference.

 

Added some protection to the bed...

And finally got my new battery set up correctly!! Thanks for the quick turn around @Coupe

 

Welcome! Truck looks good!

 

Yeah only done that. I'm going to do the doors this weekend if I can find the time. It helped a little bit I can't hear the diff whine as bad.

 

What is the offset on those?

-12?

 

installed the canopy camper from my old 3rd gen onto a 2nd gen today.

 

Yep

 

Added the vinyl letters to my faux pro grill .
Before:

afrer:



all I had time for. Christmas lights going up and only got about 1/2 of it completed.

Christmas threw up in my driveway

 

Received my leather wrap today from East detailing, real leather, stitching is very tedious took about 4hours off and on. Looks nether than expected for 40 bucks, the leather is cut a little too short around the controls so I’ll have to figure something out to stuck them down.

 

that looks freaking amazing! which tip was it?

 

Nice, If you don't mind how much was the set?

 

I removed the air dam, added 150 pounds to the front, and noticed no difference in the mileage. I did find out when I took the air dam off, the dealership had ordered my sport with a bash plate. That may have helped with not losing the mileage. And you're right, much better than my F150, and I traded a Focus for the Taco. Not worried about +/- on the mileage.

 

A couple of bumpy roads might speed that process up. You should go and take her with ya!

 

OMG! Like the idea but not the 4 hours stitching. Looks nice and custom.

 

BHLM w/ MESO sides finally complete. Really like the look of it.

 

Imagine not seeing it in print and having someone saying it to you instead.

Typical response is "there's no f in way." Then......, "I don't get it." (several times)
Followed by......, "But I still don't get it!"
And then someone explains it to you and you feel like a doofus. Oy!

 

-Installed N2 Designs Remote Start.

-Made a base for magnetic phone mount that clips onto the dash trim:


-Used the following kit of parts to put in 4 bed rail anchors on each side to replace the retarded OEM ones.

Solid Stainless T Nuts

T Slot Nuts for Toyota Bed Deck Rail, 4 PCS Stainless Steel Nuts for Tacoma & Tundra Cleats, Tie Downs and Accessories 3/8"-16 Thread 304 Steel

https://www.amazon.com/gp/product/B07DXJ9QGF/

Stainless Socket Cap Screws

$9 Hillman 44018 Stainless Steel Button-Head Socket Cap Screws (3/8"-16 x 1") - 5 pieces , Zinc

https://www.amazon.com/gp/product/B00IZFS0VI/

Steel Tie Down Anchors

$24 Seven Sparta Tie Down Anchors for Truck, Trailer, Warehouse, Boat, 10 Pack of Heavy Duty Steel V Ring Bolts, Tie Down Rings（Black）

https://www.amazon.com/gp/product/B07H9ZKRH6/