What Have You Done To Your 3rd Gen Today?

that looks freaking amazing! which tip was it?

 

Nice, If you don't mind how much was the set?

 

I removed the air dam, added 150 pounds to the front, and noticed no difference in the mileage. I did find out when I took the air dam off, the dealership had ordered my sport with a bash plate. That may have helped with not losing the mileage. And you're right, much better than my F150, and I traded a Focus for the Taco. Not worried about +/- on the mileage.

 

A couple of bumpy roads might speed that process up. You should go and take her with ya!

 

OMG! Like the idea but not the 4 hours stitching. Looks nice and custom.

 

BHLM w/ MESO sides finally complete. Really like the look of it.

 

Imagine not seeing it in print and having someone saying it to you instead.

Typical response is "there's no f in way." Then......, "I don't get it." (several times)
Followed by......, "But I still don't get it!"
And then someone explains it to you and you feel like a doofus. Oy!

 

-Installed N2 Designs Remote Start.

-Made a base for magnetic phone mount that clips onto the dash trim:


-Used the following kit of parts to put in 4 bed rail anchors on each side to replace the retarded OEM ones.

Solid Stainless T Nuts

$13 T Slot Nuts for Toyota Bed Deck Rail, 4 PCS Stainless Steel Nuts for Tacoma & Tundra Cleats, Tie Downs and Accessories 3/8"-16 Thread 304 Steel

https://www.amazon.com/gp/product/B07DXJ9QGF/

Stainless Socket Cap Screws

$6 Hillman 44018 Stainless Steel Button-Head Socket Cap Screws (3/8"-16 x 1") - 5 pieces , Zinc

https://www.amazon.com/gp/product/B00IZFS0VI/

Steel Tie Down Anchors

Seven Sparta Tie Down Anchors for Truck, Trailer, Warehouse, Boat, 10 Pack of Heavy Duty Steel V Ring Bolts, Tie Down Rings（Black）

https://www.amazon.com/gp/product/B07H9ZKRH6/

 

Gained some extra clearance for the 285/17r17 spare up in the OEM location...

 

I like this. I don't know if it is legal in Maine. We have annual vehicle inspections. I'll have to research to see what the specs are for where the exhaust needs to located. Anyone have ideas about this?

 

Replaced my OEM rubber floor mats for some WeatherTechs. The passenger side is a little warped, I'm hoping it will conform when it gets hot. I had always wanted Husky mats but Pep Boys was closing their retail store and had the set for $86.






Selling the old ones with 30K miles here, locally (North Atlanta), if anyone is interested:
https://www.tacomaworld.com/threads/oem-all-weather-floor-mats.640275/#post-22108927

 

It doesn't remove the muffler, catalytic converter...in VA we have annual vehicle inspections, but this isn't (as far as I read) reason for inspection rejection.

 

I've had to deal with this in the past with Weathertechs. I found that heating them up with a heat gun and bending them into shape will make them fit perfectly.

 

Last night I installed the DB Customz honeycomb grill. I like this piece a good deal.

 

I really like this. With the bike on the cover, you can still store plenty below it. Good job!

 

Nice job. I like the bumper set up with the lights. What is it?

 

TRD catback with the black tip

 

Ordered some Falken WP AT3W 285/75R16's. After a year with Cooper ST Maxx tires 265/75R16 I couldn't take the pulling right and road noise anymore. Other than that they have been great in all weather.

 

just finish install Tacogarage pro grille and hood swap with one of TW member.