What Have You Done To Your 2nd Gen Tacoma Today?

Whelp, there goes my 1 patch rule.... okay, new promise, ONLY 2 patches....

 

What seat covers? I dig the pattern going on, in the little bit of them I can see.

 

I'm with you here, I own two patches and currently only have one in the truck...but,

these are so dangerous/tempting: https://www.tacomanation.net/collections/patches

 

Yes. I've seen this thread lol

 

Went on a little trip up to Stevens Pass, drove a bit up Upper Mill Creek Rd (FS Rd 6960). Nice and chilly day, not quite enough snow to sled but had fun getting up to the mountains.

 

I was using an old Scosche vent mount cell phone holder in the middle vent, but I didn't really like the location. A little too high up and awkward to put in the cradle, plus come spring/summer I'm going to need the airflow from that vent since I live in AZ. I had a sheet of 1/4" ABS laying around from a project a while back, so I decided to play around with it. A heat gun, a vice, a hammer, and the disassembled Scosche cradle and I'm in business. I still need to clean the adhesive residue from some duct tape off the bracket I made, and clean up and polish the edges, but I'm pretty happy with it. Location is great, doesn't get in the way of anything, the Apple Face ID works easily, and I have my vent back. For now it's held in place with the 3m red-backed double sided tape, and I've had good success with that stuff even in the summers here. If it ends up not holding come summer time I'll add a backing plate and a couple of black countersunk black screws. Road tested it and it's super solid, no shakes, rattles, or vibrations.

 

Picked up an arb for 500 bucks!

 

Nice!

 

Wo wo wo wo. That looks fun!

 

What mirror is that? I like the frameless look

 

It's the OEM mirror

 

I managed to stall my AT yesterday. Only happened once, 1st time its ever happened.

Can this be a symptom of a bigger problem? Or if it just happened once, its a fluke? I opened Torque and checked for codes right away, no codes showed up.

I was using it pretty good when it happened


That washout is deep and wants to eat a taco



Pics make it look so easy Took an hour with shovel, sliding, re-positioning traction boards over and over, and over. Learning how to use those boards pretty damn good

 

@theolee @christian06

@theolee not sure if it was mine that you saw but yes upol Raptor is really really good stuff. I have used it for my projects than my own truck. You can go thicker or thinner with with the application, it lasts basically forever, and looks great as well. With those spots you feel you'd have to fix, I would take some good sandpaper and sand them down to blend...the raptor will take care of the rest.

 

@theolee @christian06 Here is the link to the before and after pics of it on my truck

 

Well yesterday.

Activated the 4x4 for some exercise lo and high.

Greased drive shafts just because.

Other fluids were changed a week or two back.

Now that I'm ready for the snow , it won't show up.

4-6 in expected ,wait and see

TOMB

 

Finally got a good bath today before the Auburn game! Haven’t had one since the summer! WDE!!!

 

they were Saddleman's, Blanket .... https://www.shearcomfort.com/Saddle...SnMSDyWaDhhJ7W1SCCkDXb5GxFUZa7ncaAs3YEALw_wcB

 

be aware that any yotas use British Pipe Thread pipe, NOT NPT like we do in the us.. , at least on 2nd Gens, cant speak for the 3rds but wud not expect them to be different...on the 4.0 L I added a tee under the lo press switch as a feed for my gage...

 

Diff breather relocation to left brake light housing. Super easy.

 

Went to install my @CaliRaisedLed antenna mount and found that it won't work with my cap.

What say you, Cali?