Hard tri fold tonneau cover with oem cargo divider

Does anyone know of a hard tri fold cover that works with the oem cargo divider? Was disappointed to learn I couldn't order the oem one then I almost pulled the trigger on the mx4 until I seen it comes with brackets to drop the rails for the cleats. Which I assume wouldn't allow me to use the cargo divider anymore. There has to be one that sits up higher and doesn't affect the track for the cleats.

 

The OEM covers are on Craigslist all the time where I'm at. Just make sure you swap bed rails with the seller if you go that route.

 

The oem cover doesnt use the rails, so you should be ok there. The issue I think is that the oem divider has knobs that stick up to high for the cover to close but i think you can just remove the knobs for finger bolts or flip the brackets upside down and it should work.

 

The OEM tonneau cover works fine with the OEM cargo divider. You just need to install the brackets upside down so the knobs are on the bottom. I think there are other threads on this topic with pictures.

 

I've looked at Craigslist in my area and haven't been able to locate an oem cover, so I need to go aftermarket. Like you said, the issue is the cargo divider has those knobs that come out the top. But you're able to flip them upside down? Is there an aftermarket hard tri fold that sits above the bed rails?

 

I can confirm this. I had to install the divider brackets upside down and it works fine. The issues comes from trying to put stuff behind the divider and accessing it. I sold the EOM cover and got a Solid Fold 2.0 - so my choice in a new tonneau created my problem...