Colorado B.S. Thread

But wouldn't setting the actuator rod back into the 2Hi lowest position reset the timing one way or another if the limit switches test out correctly for 2Hi, then 4HI and then wouldn't the timing be correct if the limit switches were all in the correct position for each setting? It's a pretty frustrating design.

 

Run it up to the transmission shifter hole

 

From my experience, no. Being one tooth off causes so much havoc. You could try until you find the right combination.

Just FYI, the most common failure is the front diff actuator.

 

I replaced the front diff actuator first but that wasn't it. When you say timing do you mean the cog inside the actuator or the position on the shaft going into the transfer case?

 

Happy Iron Bowl Day!!! WAR DAMN EAGLE!!!!!

 

I can't express the accuracy of this meme right now, seeing my paycheck from this past week with all the OT I worked

 

Can only hope I get most of it back come tax return season

 

Get back to work! Sounds like it was a great Black Friday for you!

 

Dang! That’s crazy is that 17-21% nationwide?

 

The shaft(s) inside the transfer case are tricky as they over run and lock in with detents. Every time I've had luck retiming an actuator I had a new one on the bench to compare it to. The gearing of the shaft to the motor, the motor to sensor gearing all have to be timed with each other. It would be nice if Toyota gave measurements for shaft and electrical position, they don't and consider that a non-serviceable part.

 

What a half of football. Very entertaining!

 

War Damn Eagle. Hell of a terrible game. This road race to 100pts is ugly

 

6 years ago? That said, I just assumed he’d died decades ago.

 

Welp, I was a victim of Facebook . Read the entire article and everything, never bothered to check the date

 

Ehh, it happens.

 

Well shit, that's a pain in the ass! I don't think it'd take much to put some alignment marks on it. Oh well.

 

Saw this on Instagram.. that font sure looks familiar... has anyone dealt with this company?

 

Think you are meaning it looks similar to Pelfrey's design? They look like they mostly do jeep stuff and have been around for a while.
https://mountainoffroad.com/pages/about

 

Ya that was my initial reaction but I didn’t see that. Sean Jennings must be doing their marketing.

 

Happy Birthday Charles!!!
@CharlieCafe