OVTune 3.5L Tacoma Supercharger and Twin Turbo Systems

Awesome! Just saw that last night, didn't know it was your but I should have assumed it was a TW member. Very clean truck. I have to admit, I began to chuckle when Andre began pointing out every little add-on you made to keep up with technology.

 

This!! x1,000,000

 

Could probably go 1million without FI

 

This was brought up early in the thread with little to no comment by Mat/OV. And shouted down by the curb crawlers.....

 

Guess you'll just have to feed your custom fender intercooler with air from a snorkel.

 

Shouldn't be hard to move inter cooler up a little higher if needed.

 

Awesome, can you recommend a good snorkel company

 

Probably by punching a hole in your skewp and mounting the intercooler above the engine. Hell I would probably do that just because coolness factor.

Possible to do that and to get a ram air scoop to grab a little air from the top of the grill and run it over as well. Just takes some fab skillz.

 

The air flow over the hood is already atrocious. I'm not sure you would get much air flow even if it it was open. Look at the water droplets that sit still on top of the hood. One more possibility is that this vent would increase pressure under the hood and decrease radiator air flow.

 

Top mount intercoolers (intercoolers positioned directly above the engine) are notorious for terrible heatsoak. I'd know, I had a speed3. Definitely recommend not going top mount if you want to keep your BATs down

 

Sloop Imports

 

I get all my turbo kits and skewps from Alibaba.

 

We will have our update on the turbo setup this month. Some of the parts we need to CNC before the kit becomes available, but our new CNC machine will be here before the end of the month so .

overall I'm really liking the setup.
Install, overall is pretty easy, with the hardest part being installation of the driver side downpipe, as you have to tighten one bolt through the wheel well where you can't see too well if you leave the wheel on.

 

In-house CNC Fab. Nice!

What are you getting for a machine?

 

pm me if you'd like to know more

 

Excellent and congratulations!

Curious if you're talking 2D plasma/laser CNC or multi-axis mill... would enjoy shop and/or equipment pics on your Facebook feed if you're feeling generous.

[Edit: Apologies, I missed your previous message to DM]

 

We will have a lot of pics of our shop and setup some time next year probably around spring, because it's not 100% complete yet.

Anyways lots of tickets to get to, just wanted to update you guys.

 

no rush on my ticket....trying to track down the power cord for the laptop

 

@OVTune did you get that MAF housing shipped out? <3 thanks again btw

 

Thanks, sir.!

Carry on...!