Pics of 2nd gens with 18” wheels

Who’s rocking 18” wheels? Post em!

P.s. don’t care about the sidewall/air-down hate. Save it.

 

I have 20”s.....

 

Old 18” BBS/TRD wheels.

 

My Limited came with the plastic covered 18's - went to Yokahama 255/70R-18's to get some sidewall height. They are 10 mm less section width but overall 32" tall. My outfit is mostly a daily driver and the AT tread seemed like the best street choice.

 

Mine has 18" when I first got it but they came off within a week

 

18x9 +0 with 285/60/18 Geolanadar A/T.

Bought them from https://www.ambitwheels.com/ back in 2017. They might be gone now though. Website is dead.

I'd LOVE to have a set of real-deal Volks. But, those are crazy spendy.

 

Ultra Crusher Rims 18x8.5 10mm offset with 265/65/18 Kumho Road Venture ATs.

 

I was rocking the 17” six shooters for a bit to compensate for a 57lb tire. Today, I picked up 265/70r18 Bridgestone Dueler Revo 3s (32.6x10.7) to go with my 18” XDs. I’m loving the tire but still not sold on the wheel. I’d like to go a bit narrower but 18x8.5s are all wicked expensive.

 

KO2s 18" Vision Fury Wheels 2007 Sport.

 

Anybody have 18x9 rims? I am curious if they'll rub with no suspension.

bordinco90 Any issues with rubbing on your 18x8.5 10mm offset? I am looking to get 18x9 +18mm with 265/60/18's

 

Those tires fit perfect! No suspension? What size tires? Your wheels are 18x9 ? Offset?

 

275/65/18

 

Cheapo helo 878 wheels with michelin defender 295 75 18 (34.5). 18x9 -12 offset I believe. 6" lift

 

2.5” lift in the front, CMC, 1.5”-2” AAL in the rear. 275-70-18”, just a hair over 33”.

 

Every X-Runner came from the factory rocking 18" wheels!

 

2015 Limited 265/70r18 with 3" lift, factory stock wheels, with stock WIDTH tires,,could have gotten slightly larger tires, but didn't want to cut and chop,,, jic

 

My truck has a basic ICON Stage 2 which leveled and raised the truck about 2 inches. I have been running 265/65-18's for about 80K miles and never had any problems. I'd like to go with 265/70-18's to get a little more sidewall. I'd be going from a 31.6" diameter to a 32.6" diameter tire. Any thoughts on whether I'll have any rubbing problems?

If I did have any rubbing, would spacing the wheels out 1.25 inches help or just introduce new problems?

 

I have a 3" toytec kit with 265/70r18, there's room for a bigger tire. The width is good, you can get a finger back there without spacers. I think you should be good