Ontario BS Thread

The family name is Toyoda. Changed the "d" to a "t" for good luck or something like that.
Looks like it worked!

 

https://youtu.be/mCLvb28jCVo
very nice gen2

 

Always a blast messing around in the snow. That's why everyone should come out to the snow run.

 

hey what's the best tool to trim the fender flares? specifically the plastic under the front mud flap.

dremel? go over it 100 times with a utility knife?

 

Can you use a heat gun and mould it out of the way or have to cut it?

 

Gonna have to cut it off. Just wanna do it somewhat cleanly.

 

I did both heat gun and dremmel

 

ok I will give that a go. by the way I bought some method wheels > your truck was the inspiration.

 

Oh nice. Which ones you get??

 

Scratched mine all to shit on that sand hill lol.

 

haha good times

 

LOL

 

When I trimmed my flare for the bumper, the normal Dremel cutoff wheel for steel will melt the plastic and leave a rough edge. One of these blades would be better, but it's $35 apiece: https://www.canadiantire.ca/en/pdp/dremel-carbide-cutting-shaping-wheel-0544721p.html

 

I have been getting good at cutting third gens. All depends how much you want to cut. Dremel, tin snips, or a grinder/jigsaw work.

 

that looks like the ticket but $35 for one blade?!?

 

Dremmel has cheap plastic blades as well. Either way if you get build up, its just plastic...sand it off. Easy to clean up and make look good.

 

There's a dedicated blade for plastics, $21 for a 5-pack, but it requires the EZ Lock spindle. https://www.canadiantire.ca/en/pdp/dremel-plastic-ez-cut-wheel-5-pack-0544775p.html#srp

 

Those tyres tho

 

holy sh!t I have a Dremel but never really looked into all the add ons and stuff you can get for them. Maybe I should post my question in the Ontario BS Thread on dremelworld.com.