What Have You Done To Your 3rd Gen Today?

Ok thanks

 

I thought about getting one of those, but ended up just using rexings hardwire kit and plugged it into the wiper fuse. Not hard at all. Just tucked the wires under the headliner with my fingers. I really have no idea how to describe the plug I'm sorry. It's a fairly common power plug though.

 

Quick addition of bug guard to my Storm Trooper LOL

 

Holy shit was the trip all downhill?

 

You guys are supposed to be convincing me to spend money on the truck, not a new M&P! I’ve been on the fence for awhile there too.

 

Tpo
Matches the bumper perfect.

 

Time to get back on track? With playoffs in the air? Better success rate if you wait till after LSU nudges past Ohio state for the title

 

Added RAM style phone mount
Geaux Tigers!

 

Is this what you used? Did you run it to the drivers side down the A pillar and is the cord long enough to hide the control box under the dash? I suppose you used an add a fuse to the wiper fuse under the dash? Also how did you run the wiring for the rear camera? Thanks and sorry for so many questions. May do it with their wiring.

Rexing Mini-USB Hardwire Kit for V1, V1P, V1 3rd Gen, M1, M2, M1 PRO Dashcams

https://www.amazon.com/Rexing-Mini-...Q6CWM63EAQB&psc=1&refRID=FABEEHDB3Q6CWM63EAQB

 

Does this kit allow you to run the dashcam 24/7 even when the vehicle is off?

 

I would think it would if you get power from a source that is always on. Not sure how much drain it would put on your battery.

 

Meso turn signals, ESI tailgate seal, and I sealed up the bed cubbies. I used silicone to plug the drain holes, then taped bike inner tube to the outside of the larger holes. The bike tube allows flexibility for the latches to move, yet keeps it sealed! Trying to decide if it's worth running a bead of silicone around the outside edges of the cubbies, but dust coming out of there seems negligible.

 

Upgraded to Toyota 4Runner front brakes today..

 

on my list next time i need brake service. how's it compare?

 

It cuts power if the battery drops to 11.6(?) amps.

 

Sorry. Think it's this one. The other isn't for the V1P 3rd gen but this one is.

Rexing Mini-USB Hardwire Kit for Rexing V1P 3rd Generation, V1P Pro, V2 Dash Cams

https://www.amazon.com/Rexing-Mini-...DMGYAHAW9FK&psc=1&refRID=5G83T0B4RDMGYAHAW9FK

 

So far so good, will know more once I'm in traffic this week.. after adding full skids and bumpers, the stock's were definitely being stressed.

 

what kind of dog is that?

 

The camera I'm looking at is the

$150 Rexing V1P 4K Car Dash Cam 2.4" LCD 2160p Front + 1080p Rear Wi-Fi 170° Wide Angle Dual Channel with Rear Cam, G-Sensor, WDR, Loop Recording Mobile App Supercapacitor

Rexing V1P 3rd gen that uses a mini usb for power. I would think the mirror adapter with a usb to mini usb cord would do the trick. Is that what you did with yours?

 

Yes. That'll work great! I think I used an 8" cord because I mounted my camera in the existing go-pro mount. If you're not doing that a 6" would do it.