1st Gen Lunchtable Thread - General Discussion

I don't need them I had a qd mount on the rifle and did the swap.

 

That's kinda like the filter I have for my Weber carbs. For dust.

 

Yeah screw conforming...

 

B’s get degree this semester apparently, done with school for about a month

 

Agree. Too 'busy' here as well. I told myself, deal with the alignment and while it's 'down' do a coolant flush and replace the hose clamps since I have that pink crusty bs on the lower hose at the inlet. Also need to change the oil.

So, what do I do... I said screw it and went fishing. Took the Camry instead.

 

I'm still looking at a mid to long range setup for a ar15. I got to many gun builds

 

Lol dude speaking of..I need an oil change as well. Might just get it done at work since I have no time.

Was looking for a new sectional and couldnt find anything I wanted.

Least I bought a new knife set and other dishes.

 

18" quality barrel with a 1:7 twist, and you'll get out to 800 yards with 75gr SMK.

You can go custom so you can shoot +80gr and a 1:6.5 twist, but you should be reloading if you're doing that. And at that point, I'd recommend 6mm BR instead.

 

600-800 yards would be nice I think a red dot for 200 and under and that Leopold devo would be nice lol I think a 16" barrel can do that right?

 

Meh

 

Nah! 5.56 or nothing, .308 is ok.

 

good grief. look at those springs. wow.

 

I want one!!!

 

Ironman or Slinky coils, that's their colors

 

Son, clean your room!!!

 

Badass!!!

 

That's what a common ar15 round is 556. there is also 6.5 Grendel or 6.8spc and 300 blackout.

 

A shooter with no marksmanship, ammunition with huge deviations, and a 16" barrel, and 800 yards is wildly a no go.

But yes a 16" barrel will reach it, granted you've got the right ammo and you're a good shooter. A lot of drop, and wind will easily push your round as itll be subsonic.

I like the velocity I get out of the longer barrels with my hot reloads.