Tacoma - OVTUNE - VFTUNER - Update Info and Original Development

We can't make a 3rd gen 2.7L tune, we have already posted that.

As for the 2nd gen. We've already tuned the 2.7L, N/A and with boost. But will not release it until we have more cal files for them.

 

All jokes aside, I do appreciate the response. I'll ldo some digging to find your post. Thanks.

 

You will NOT have buyers remorse with OVTune.
LOVING it on my '17 DCSB OR A/T with heavy 33s, sliders, Slimeline bumper, and 2k winch.

 

Saw where final 2.0 was to be posted 11-10-19. Where can I find this?

 

I don't think this is the final version. It's still in beta. Final version will come soon. The beta can be found here:

https://www.ovtuned.com/pages/2-0-public

 

It’s not out yet go read his website

 

You’ll be able to download 2.0 final with Flash Manager when it is released. @OVTune will post when ready.

 

Try this:
https://www.ovtuned.com/pages/2-0-public

 

Is there any updated information on 2018 handheld capability? Been very patient the last couple months. Updated info would be appreciated. Thanks in advance @OVTune

 

Thank you, yeah I’ve tried this, also they emailed the 2020 owners links as well which I tried, not having any luck with the flash manager software. It’s probably me, first time user, but I’ve been following the instructions to a tee(at least I think I have been lol) and keep getting hung up. Are we supposed to ignore the whole enter your vehicle year, ecu calibration, tune type and octane type, and just try and use the “open download” link in the “Config” tab?

 

If I was you, I’d immediately re-flash to a 2.0 beta variations for your ECU, before you encounter the ever dreaded “Break Overide Malfunction”

Just trust you don’t want it happening while your entering the freeway with an 18wheeler coming up on your rear!

 

A lot of us had problems with anti-virus software blocking flash manager. "White listing" the OpenECU and OVTune folders fixed it.

 

Unrelated... why do you have a Prop 65 link in your sig? LOL Are you one of a million chemicals deemed dangerous by CA?

 

Protecting myself from those CA lawyers! (Just a goof as I see it everywhere.)

 

Good to hear. Haven’t seen anything so far. Must have paid for mine just after you and now starting to get curious.

 

Download the 2020 tune from the website, don't try and download from flash manager. Open up P5 flash and under the flashing utility, press flash it, when it asks which file, pull up the file you downloaded from ovtuned website.

 

Yes ignore all that, but No on the download link.

Try this:

Turn off Virus Protection, Update Flash Manager under the Help tab, Click on the Tuning tab, open P5Flash Utility, select Flash It, select 2020 OVTune File, select OK on the battery voltage warning, complete tuning by turning off ignition when prompted to, disconnect cable, start truck for 5 min, turn back on real time virus and threat protection. More here. (you should be connected to WiFi for the update, connect the laptop at the diagnostic port, with the engine off, have the ignition in the "on" position)

 

For the beta files, do we load the "catted down pipe" file (i.e. completely stock exhaust)?

 

THANKS MAT!!!!

 

No, those options would be for if you had OVT’s dump tubes (catted or non)